Acer Predator Connect W6x (OpenWrt U-Boot Layout) OpenWrt Firmware
The Acer Predator Connect W6x (OpenWrt U-Boot Layout) is supported by OpenWrt on the mediatek/filogic target. 4 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mediatek/filogic | acer_predator-w6x-ubootmod |
Downloads
Download images
OpenWrt 25.12.5 · mediatek/filogic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mediatek-filogic-acer_predator-w6x-ubootmod-bl31-uboot.fip | bl31-uboot.fip | ccd98723305f… |
| openwrt-25.12.5-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb Minimal kernel image, useful for first install or recovery. | kernel | a40083222a92… |
| openwrt-25.12.5-mediatek-filogic-acer_predator-w6x-ubootmod-preloader.bin | preloader.bin | 4215ec48f52b… |
| openwrt-25.12.5-mediatek-filogic-acer_predator-w6x-ubootmod-squashfs-sysupgrade.itb Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 047ce08b9e0c… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Acer Predator Connect W6x (OpenWrt U-Boot Layout) ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (5)
kmod-usb3 kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mediatek-filogic-acer_predator-w6x-ubootmod-bl31-uboot.fip ccd98723305f4a377553b6fc695c6882007782a917f964004a82582033d27dae openwrt-25.12.5-mediatek-filogic-acer_predator-w6x-ubootmod-bl31-uboot.fip
Build custom firmware
Need more than the default image for the Acer Predator Connect W6x (OpenWrt U-Boot Layout)? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Acer devices
- Acer Connect Vero W6m OpenWrt firmware
- Acer Predator Connect W6 OpenWrt firmware
- Acer Predator Connect W6d OpenWrt firmware
- Acer Predator Connect W6x (Stock Layout) OpenWrt firmware
More devices on mediatek/filogic
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.