Alcatel HH40V OpenWrt Firmware
- CPU
- Qualcomm Atheros QCA9531
- RAM
- 128 MB
- Flash
- 16 MB
The Alcatel HH40V is supported by OpenWrt/ImmortalWrt on the ath79/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros QCA9531 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 650 MHz |
| RAM | 128 MB |
| Flash | 16 MB |
| 100 Mbit Ethernet ports | 2 |
| WLAN hardware | Qualcomm Atheros QCA9531 |
| Switch | Qualcomm Atheros QCA9531 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ath79/generic | alcatel_hh40v |
| ImmortalWrt | 25.12.1 | ath79/generic | alcatel_hh40v |
Downloads
Download images
OpenWrt 25.12.5 · ath79/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ath79-generic-alcatel_hh40v-squashfs-factory.bin For first-time flash from stock firmware. | factory | b8e0ef22d866… |
| openwrt-25.12.5-ath79-generic-alcatel_hh40v-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | b9b4049a8998… |
| openwrt-25.12.5-ath79-generic-alcatel_hh40v-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 3bf20b12e81d… |
ImmortalWrt 25.12.1 · ath79/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ath79-generic-alcatel_hh40v-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 1f8f7f71cb0c… |
| immortalwrt-25.12.1-ath79-generic-alcatel_hh40v-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 371e9cd3c1a6… |
| immortalwrt-25.12.1-ath79-generic-alcatel_hh40v-squashfs-factory.bin For first-time flash from stock firmware. | factory | 7495b6007ec7… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Alcatel HH40V ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ath79/generic
Device packages (3)
kmod-usb2 kmod-usb-serial-option kmod-usb-net-rndis
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ath79/generic
Device packages (3)
kmod-usb2 kmod-usb-serial-option kmod-usb-net-rndis
Target default packages (33)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ath79-generic-alcatel_hh40v-squashfs-factory.bin b8e0ef22d866c5e508d5e9380376bd4185f6f935a355b24391ee10b54c1780b3 openwrt-25.12.5-ath79-generic-alcatel_hh40v-squashfs-factory.bin
Build custom firmware
Need more than the default image for the Alcatel HH40V? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on ath79/generic
- 8devices Carambola2 OpenWrt firmware
- 8devices Carambola3 OpenWrt firmware
- 8devices Lima OpenWrt firmware
- Adtran/Bluesocket BSAP-1800 v2 OpenWrt firmware
- Adtran/Bluesocket BSAP-1840 OpenWrt firmware
- AirTight Networks C-75 OpenWrt firmware
- ALFA Network AP121F OpenWrt firmware
- ALFA Network AP121FE OpenWrt firmware
Upstream
Upstream & source
- downloads.openwrt.org — ath79/generic 25.12.5
- downloads.immortalwrt.org — ath79/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.