ALFA Network AC1200RM OpenWrt Firmware

CPU: MediaTek MT7620A
RAM: 64 MB
Flash: 16 MB

The ALFA Network AC1200RM is supported by OpenWrt on the ramips/mt7620 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPU	MediaTek MT7620A
CPU cores	1
CPU frequency	580 MHz
RAM	64 MB
Flash	16 MB
100 Mbit Ethernet ports	5
WLAN hardware	MediaTek MT7620A, MediaTek MT7612EN
Switch	MediaTek MT7620A

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	ramips/mt7620	alfa-network_ac1200rm

Downloads

Download images

OpenWrt 25.12.5 · ramips/mt7620

Image	Type	sha256
openwrt-25.12.5-ramips-mt7620-alfa-network_ac1200rm-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	0a4b92568efb…
openwrt-25.12.5-ramips-mt7620-alfa-network_ac1200rm-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery.	kernel	d9baa5212665…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the ALFA Network AC1200RM ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (4)

kmod-mt76x2 kmod-usb2 kmod-usb-ohci uboot-envtools

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-rt2800-soc libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-ramips-mt7620-alfa-network_ac1200rm-squashfs-sysupgrade.bin
0a4b92568efbc1e4f174bcd636ca62d6479c02900a732a823390837b6f6f6a50  openwrt-25.12.5-ramips-mt7620-alfa-network_ac1200rm-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the ALFA Network AC1200RM? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More ALFA Network devices

More devices on ramips/mt7620

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.