ASRock G10 OpenWrt Firmware
- CPU
- Qualcomm Atheros IPQ8064
- RAM
- 512 MB
- Flash
- 128NAND MB
The ASRock G10 is supported by OpenWrt/ImmortalWrt on the ipq806x/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros IPQ8064 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 1400 MHz |
| RAM | 512 MB |
| Flash | 128NAND MB |
| 1 Gbit Ethernet ports | 5 |
| WLAN hardware | 2x Qualcomm Atheros QCA9980 |
| Switch | Qualcomm Atheros QCA8337 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ipq806x/generic | asrock_g10 |
| ImmortalWrt | 25.12.1 | ipq806x/generic | asrock_g10 |
Downloads
Download images
OpenWrt 25.12.5 · ipq806x/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ipq806x-generic-asrock_g10-squashfs-nand-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | nand-sysupgrade | 58ab3678cb83… |
| openwrt-25.12.5-ipq806x-generic-asrock_g10-squashfs-nand-factory.bin For first-time flash from stock firmware. | nand-factory | d15b4ea01178… |
| openwrt-25.12.5-ipq806x-generic-asrock_g10-initramfs-fit-uImage.itb Minimal kernel image, useful for first install or recovery. | kernel | 01a021a52709… |
ImmortalWrt 25.12.1 · ipq806x/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ipq806x-generic-asrock_g10-initramfs-fit-uImage.itb Minimal kernel image, useful for first install or recovery. | kernel | 8e20d5c606ec… |
| immortalwrt-25.12.1-ipq806x-generic-asrock_g10-squashfs-nand-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | nand-sysupgrade | ee5e834f5cff… |
| immortalwrt-25.12.1-ipq806x-generic-asrock_g10-squashfs-nand-factory.bin For first-time flash from stock firmware. | nand-factory | 370f32e1edd1… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the ASRock G10 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ipq806x/generic
Device packages (2)
kmod-i2c-gpio ath10k-firmware-qca99x0-ct
Target default packages (37)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ata-ahci kmod-ata-ahci-platform kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-phy-qcom-ipq806x-usb kmod-usb-dwc3-qcom kmod-usb-ledtrig-usbport kmod-usb-ohci kmod-usb2 kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ipq806x/generic
Device packages (2)
kmod-i2c-gpio ath10k-firmware-qca99x0-ct
Target default packages (44)
apk-openssl autocore automount base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ata-ahci kmod-ata-ahci-platform kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-phy-qcom-ipq806x-usb kmod-usb-dwc3-qcom kmod-usb-ledtrig-usbport kmod-usb-ohci kmod-usb2 kmod-usb3 libc libgcc libustream-openssl logd luci luci-app-cpufreq mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ipq806x-generic-asrock_g10-squashfs-nand-sysupgrade.bin 58ab3678cb8393e8547726e5b06c7cf00315316938e64c9b90a9f63e43ed8374 openwrt-25.12.5-ipq806x-generic-asrock_g10-squashfs-nand-sysupgrade.bin
Build custom firmware
Need more than the default image for the ASRock G10? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on ipq806x/generic
Upstream
Upstream & source
- downloads.openwrt.org — ipq806x/generic 25.12.5
- downloads.immortalwrt.org — ipq806x/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.