Buffalo WZR-900DHP OpenWrt Firmware

CPU
Broadcom BCM47081A0
RAM
256 MB
Flash
128NAND MB

The Buffalo WZR-900DHP is supported by OpenWrt/ImmortalWrt on the bcm53xx/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUBroadcom BCM47081A0
CPU cores1
CPU frequency800 MHz
RAM256 MB
Flash128NAND MB
1 Gbit Ethernet ports5
WLAN hardwareBroadcom BCM4331
SwitchBroadcom BCM47081A0

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5bcm53xx/genericbuffalo_wzr-900dhp
ImmortalWrt25.12.1bcm53xx/genericbuffalo_wzr-900dhp

Downloads

Download images

OpenWrt 25.12.5 · bcm53xx/generic

ImageTypesha256
openwrt-25.12.5-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.factory-DHP-EU.bin

For first-time flash from stock firmware.

factory-DHP-EUc7dc350b749e
openwrt-25.12.5-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.factory-DHP2-JP.bin

For first-time flash from stock firmware.

factory-DHP2-JP9d214c2b8b99
openwrt-25.12.5-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.trxtrxdd2f1c15add5

ImmortalWrt 25.12.1 · bcm53xx/generic

ImageTypesha256
immortalwrt-25.12.1-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.trxtrx4db0c51df267
immortalwrt-25.12.1-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.factory-DHP2-JP.bin

For first-time flash from stock firmware.

factory-DHP2-JP86f7c4a6fa51
immortalwrt-25.12.1-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.factory-DHP-EU.bin

For first-time flash from stock firmware.

factory-DHP-EU185dd625968a

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Buffalo WZR-900DHP ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · bcm53xx/generic

Device packages (8)

wpad-basic-mbedtls kmod-b43 kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2 kmod-usb-ledtrig-usbport kmod-usb3 kmod-phy-bcm-ns-usb3

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables nvram odhcp6c odhcpd-ipv6only osafeloader oseama otrx ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · bcm53xx/generic

Device packages (9)

wpad-openssl kmod-b43 kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2 kmod-usb-ledtrig-usbport automount kmod-usb3 kmod-phy-bcm-ns-usb3

Target default packages (34)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables nvram odhcp6c odhcpd-ipv6only osafeloader oseama otrx ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

Installation notes

  • First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.factory-DHP-EU.bin
    c7dc350b749e773b7753484cb1a351bc56c263c1f01c7d9094512350a7bf2b2a  openwrt-25.12.5-bcm53xx-generic-buffalo_wzr-900dhp-squashfs.factory-DHP-EU.bin

Build custom firmware

Need more than the default image for the Buffalo WZR-900DHP? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device