D-Link DIR-885L OpenWrt Firmware

CPU
Broadcom BCM4709C0
RAM
256 MB
Flash
32, 128NAND MB

The D-Link DIR-885L is supported by OpenWrt/ImmortalWrt on the bcm53xx/generic target. 2 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUBroadcom BCM4709C0
CPU cores2
CPU frequency1400 MHz
RAM256 MB
Flash32, 128NAND MB
1 Gbit Ethernet ports5
WLAN hardware2x Broadcom BCM4366
SwitchBroadcom BCM4709C0

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5bcm53xx/genericdlink_dir-885l
ImmortalWrt25.12.1bcm53xx/genericdlink_dir-885l

Downloads

Download images

OpenWrt 25.12.5 · bcm53xx/generic

ImageTypesha256
openwrt-25.12.5-bcm53xx-generic-dlink_dir-885l-squashfs.binbinef4257dc4ee8…

ImmortalWrt 25.12.1 · bcm53xx/generic

ImageTypesha256
immortalwrt-25.12.1-bcm53xx-generic-dlink_dir-885l-squashfs.binbin7d5aa411117b…

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the D-Link DIR-885L ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · bcm53xx/generic

Device packages (9)

wpad-basic-mbedtls kmod-brcmfmac brcmfmac-firmware-4366b1-pcie kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2 kmod-usb-ledtrig-usbport kmod-usb3 kmod-phy-bcm-ns-usb3

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables nvram odhcp6c odhcpd-ipv6only osafeloader oseama otrx ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · bcm53xx/generic

Device packages (10)

wpad-openssl kmod-brcmfmac brcmfmac-firmware-4366b1-pcie kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2 kmod-usb-ledtrig-usbport automount kmod-usb3 kmod-phy-bcm-ns-usb3

Target default packages (34)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables nvram odhcp6c odhcpd-ipv6only osafeloader oseama otrx ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

Installation notes

  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-bcm53xx-generic-dlink_dir-885l-squashfs.bin
ef4257dc4ee813f6c3292894f28fc3b656797066df4d1bc5e7355bc8483fed64  openwrt-25.12.5-bcm53xx-generic-dlink_dir-885l-squashfs.bin

Build custom firmware

Need more than the default image for the D-Link DIR-885L? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

Related

Related devices

More D-Link devices

More devices on bcm53xx/generic

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.