D-Link DNS-320L OpenWrt Firmware
- CPU
- Marvell 88F6702
- RAM
- 256 MB
- Flash
- 128NAND MB
The D-Link DNS-320L is supported by OpenWrt/ImmortalWrt on the kirkwood/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Marvell 88F6702 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 1000 MHz |
| RAM | 256 MB |
| Flash | 128NAND MB |
| 1 Gbit Ethernet ports | 1 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | kirkwood/generic | dlink_dns320l |
| ImmortalWrt | 25.12.1 | kirkwood/generic | dlink_dns320l |
Downloads
Download images
OpenWrt 25.12.5 · kirkwood/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-kirkwood-generic-dlink_dns320l-squashfs-factory.bin For first-time flash from stock firmware. | factory | 214ea3a1a2b1… |
| openwrt-25.12.5-kirkwood-generic-dlink_dns320l-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | d1de93803975… |
| openwrt-25.12.5-kirkwood-generic-dlink_dns320l-initramfs-uImage Minimal kernel image, useful for first install or recovery. | kernel | 0b69dfb6fcbf… |
ImmortalWrt 25.12.1 · kirkwood/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-kirkwood-generic-dlink_dns320l-initramfs-uImage Minimal kernel image, useful for first install or recovery. | kernel | f98aa89d30d9… |
| immortalwrt-25.12.1-kirkwood-generic-dlink_dns320l-squashfs-factory.bin For first-time flash from stock firmware. | factory | 26d74a76a025… |
| immortalwrt-25.12.1-kirkwood-generic-dlink_dns320l-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 94a4d4faded6… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the D-Link DNS-320L ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · kirkwood/generic
Device packages (7)
kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug kmod-usb-storage kmod-usb-ledtrig-usbport dns320l-mcu kmod-rtc-mv
Target default packages (26)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-nft-offload kmod-usb2 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
ImmortalWrt 25.12.1 · kirkwood/generic
Device packages (7)
kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug kmod-usb-storage kmod-usb-ledtrig-usbport dns320l-mcu kmod-rtc-mv
Target default packages (30)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-nf-nathelper kmod-nft-offload kmod-usb2 libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-kirkwood-generic-dlink_dns320l-squashfs-factory.bin 214ea3a1a2b1913a71a69f09ba782d184bd85da399ca344b978bfcb380d0c34e openwrt-25.12.5-kirkwood-generic-dlink_dns320l-squashfs-factory.bin
Build custom firmware
Need more than the default image for the D-Link DNS-320L? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More D-Link devices
- D-Link AQUILA PRO AI E30 A1 OpenWrt firmware
- D-Link AQUILA PRO AI M30 A1 OpenWrt firmware
- D-Link AQUILA PRO AI M60 A1 OpenWrt firmware
- D-Link COVR-C1200 A1 OpenWrt firmware
- D-Link COVR-P2500 A1 OpenWrt firmware
- D-Link COVR-X1860 A1 OpenWrt firmware
- D-Link DAP-1325 A1 OpenWrt firmware
- D-Link DAP-1330 A1 OpenWrt firmware
More devices on kirkwood/generic
Upstream
Upstream & source
- downloads.openwrt.org — kirkwood/generic 25.12.5
- downloads.immortalwrt.org — kirkwood/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.