HPE 1920-48G-PoE (JG928A) OpenWrt Firmware

Name: HPE 1920-48G-PoE (JG928A)
Brand: HPE

The HPE 1920-48G-PoE (JG928A) is supported by OpenWrt on the realtek/rtl839x target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	realtek/rtl839x	hpe_1920-48g-poe

Downloads

Download images

OpenWrt 25.12.5 · realtek/rtl839x

Image	Type	sha256
openwrt-25.12.5-realtek-rtl839x-hpe_1920-48g-poe-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	0c3ce4745468…
openwrt-25.12.5-realtek-rtl839x-hpe_1920-48g-poe-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery.	kernel	a7b6b0b21071…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the HPE 1920-48G-PoE (JG928A) ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (2)

realtek-poe kmod-hwmon-gpiofan

Target default packages (21)

apk-mbedtls base-files ca-bundle dropbear ethtool firewall4 fstools kmod-gpio-button-hotplug libc libgcc libustream-mbedtls logd mtd netifd odhcp6c procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-realtek-rtl839x-hpe_1920-48g-poe-squashfs-sysupgrade.bin
0c3ce474546892bda2cf76bb458e340f3fad64bdb0d3c05e87c7115fc69f7bbd  openwrt-25.12.5-realtek-rtl839x-hpe_1920-48g-poe-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the HPE 1920-48G-PoE (JG928A)? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More HPE devices

More devices on realtek/rtl839x

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.