Iomega NAS100d OpenWrt Firmware
- CPU
- Intel IXP420BB
- RAM
- 64 MB
- Flash
- 16 MB
The Iomega NAS100d is supported by OpenWrt/ImmortalWrt on the ixp4xx/generic target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Intel IXP420BB |
|---|---|
| CPU cores | 1 |
| CPU frequency | 266 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| 100 Mbit Ethernet ports | 1 |
| WLAN hardware | Atheros AR5213A |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ixp4xx/generic | iomega_nas100d |
| ImmortalWrt | 25.12.1 | ixp4xx/generic | iomega_nas100d |
Downloads
Download images
OpenWrt 25.12.5 · ixp4xx/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ixp4xx-generic-iomega_nas100d-squashfs-factory.bin For first-time flash from stock firmware. | factory | 20bbd1c6ce84… |
| openwrt-25.12.5-ixp4xx-generic-iomega_nas100d-ext4-factory.bin For first-time flash from stock firmware. | factory | 20bbd1c6ce84… |
ImmortalWrt 25.12.1 · ixp4xx/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ixp4xx-generic-iomega_nas100d-ext4-factory.bin For first-time flash from stock firmware. | factory | a8be675265d8… |
| immortalwrt-25.12.1-ixp4xx-generic-iomega_nas100d-squashfs-factory.bin For first-time flash from stock firmware. | factory | a8be675265d8… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Iomega NAS100d ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ixp4xx/generic
Device packages (2)
ixp4xx-microcode-ethernet kmod-rtc-pcf8563
Target default packages (28)
apk-mbedtls base-files ca-bundle dnsmasq dropbear fconfig firewall4 fstools kmod-crypto-hw-ixp4xx kmod-leds-gpio kmod-nft-offload kmod-usb-ledtrig-usbport libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
ImmortalWrt 25.12.1 · ixp4xx/generic
Device packages (2)
ixp4xx-microcode-ethernet kmod-rtc-pcf8563
Target default packages (32)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear fconfig firewall4 fstools kmod-crypto-hw-ixp4xx kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-usb-ledtrig-usbport libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ixp4xx-generic-iomega_nas100d-squashfs-factory.bin 20bbd1c6ce8456b3ff163c70253c5e1f042d13a9f70182c87d547d37ee834359 openwrt-25.12.5-ixp4xx-generic-iomega_nas100d-squashfs-factory.bin
Build custom firmware
Need more than the default image for the Iomega NAS100d? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Iomega devices
- Iomega Iconnect OpenWrt firmware
- Iomega StorCenter ix2-200 OpenWrt firmware
- Iomega StorCenter ix4-200d OpenWrt firmware
More devices on ixp4xx/generic
Upstream
Upstream & source
- downloads.openwrt.org — ixp4xx/generic 25.12.5
- downloads.immortalwrt.org — ixp4xx/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.