ipTIME A6004MX OpenWrt Firmware
- CPU
- MediaTek MT7629
- RAM
- 128 MB
- Flash
- 128NAND MB
The ipTIME A6004MX is supported by OpenWrt on the mediatek/mt7629 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | MediaTek MT7629 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 1250 MHz |
| RAM | 128 MB |
| Flash | 128NAND MB |
| 1 Gbit Ethernet ports | 5 |
| WLAN hardware | MediaTek MT7761N, MediaTek MT7762N |
| Switch | Mediatek MT7531 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mediatek/mt7629 | iptime_a6004mx |
Downloads
Download images
OpenWrt 25.12.5 · mediatek/mt7629
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mediatek-mt7629-iptime_a6004mx-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 0532ff577403… |
| openwrt-25.12.5-mediatek-mt7629-iptime_a6004mx-squashfs-recovery.bin Recovery image for restoring a device that no longer boots. | recovery | 06cd42d8ba34… |
| openwrt-25.12.5-mediatek-mt7629-iptime_a6004mx-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 8cd797ae6938… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the ipTIME A6004MX ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (2)
kmod-usb3 uboot-envtools
Target default packages (26)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mediatek-mt7629-iptime_a6004mx-initramfs-kernel.bin 0532ff5774030f3ea5c35732c7ff592f7ed6db96288a843469cc782803d24868 openwrt-25.12.5-mediatek-mt7629-iptime_a6004mx-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the ipTIME A6004MX? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More ipTIME devices
- ipTIME A1004ns OpenWrt firmware
- ipTIME A104ns OpenWrt firmware
- ipTIME A3 OpenWrt firmware
- ipTIME A3002MESH OpenWrt firmware
- ipTIME A3004NS-dual OpenWrt firmware
- ipTIME A3004T OpenWrt firmware
- ipTIME A6004NS-M OpenWrt firmware
- ipTIME A604M OpenWrt firmware
More devices on mediatek/mt7629
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.