Linksys E3000 v1 OpenWrt Firmware
- CPU
- Broadcom BCM4718A1
- RAM
- 64 MB
- Flash
- 8 MB
The Linksys E3000 v1 is supported by OpenWrt/ImmortalWrt on the bcm47xx/generic target. 2 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Broadcom BCM4718A1 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 480 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| 1 Gbit Ethernet ports | 5 |
| WLAN hardware | Broadcom BCM4718, Broadcom BCM4322 |
| Switch | Broadcom BCM53115 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | bcm47xx/generic | linksys_e3000-v1 |
| ImmortalWrt | 25.12.1 | bcm47xx/generic | linksys_e3000-v1 |
Downloads
Download images
OpenWrt 25.12.5 · bcm47xx/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-bcm47xx-generic-linksys_e3000-v1-squashfs.bin | bin | 2041a77a798f… |
ImmortalWrt 25.12.1 · bcm47xx/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-bcm47xx-generic-linksys_e3000-v1-squashfs.bin | bin | 0cf9c0c23b67… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Linksys E3000 v1 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · bcm47xx/generic
Device packages (4)
kmod-bgmac kmod-b43 kmod-usb-ohci kmod-usb2
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables nvram odhcp6c odhcpd-ipv6only otrx ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · bcm47xx/generic
Device packages (4)
kmod-bgmac kmod-b43 kmod-usb-ohci kmod-usb2
Target default packages (34)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables nvram odhcp6c odhcpd-ipv6only otrx ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd wpad-basic-openssl
Installation notes
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-bcm47xx-generic-linksys_e3000-v1-squashfs.bin 2041a77a798fd3543c381637e180967523978fbfa62428c827b48218d50b8881 openwrt-25.12.5-bcm47xx-generic-linksys_e3000-v1-squashfs.bin
Build custom firmware
Need more than the default image for the Linksys E3000 v1? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Linksys devices
- Linksys E1550 v1 OpenWrt firmware
- Linksys E1700 OpenWrt firmware
- Linksys E2500 v1 OpenWrt firmware
- Linksys E2500 v2 OpenWrt firmware
- Linksys E2500 v2.1 OpenWrt firmware
- Linksys E2500 v3 OpenWrt firmware
- Linksys E3200 v1 OpenWrt firmware
- Linksys E4200 v1 OpenWrt firmware
More devices on bcm47xx/generic
Upstream
Upstream & source
- downloads.openwrt.org — bcm47xx/generic 25.12.5
- downloads.immortalwrt.org — bcm47xx/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.