Marvell Armada 370 RD (RD-88F6710-A1) OpenWrt Firmware
The Marvell Armada 370 RD (RD-88F6710-A1) is supported by OpenWrt on the mvebu/cortexa9 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mvebu/cortexa9 | marvell_a370-rd |
Downloads
Download images
OpenWrt 25.12.5 · mvebu/cortexa9
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mvebu-cortexa9-marvell_a370-rd-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | e028d2d6f64c… |
| openwrt-25.12.5-mvebu-cortexa9-marvell_a370-rd-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 7a43a1218003… |
| openwrt-25.12.5-mvebu-cortexa9-marvell_a370-rd-targz-rootfs.tar.gz Rootfs archive for Docker / LXC containers. | rootfs | eeceea099fc7… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Marvell Armada 370 RD (RD-88F6710-A1) ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (1)
kmod-dsa-mv88e6xxx
Target default packages (26)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mvebu-cortexa9-marvell_a370-rd-squashfs-sysupgrade.bin e028d2d6f64c5aad7807dd1b054208ebf567d88ac53080b01c33020b42d6060b openwrt-25.12.5-mvebu-cortexa9-marvell_a370-rd-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the Marvell Armada 370 RD (RD-88F6710-A1)? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Marvell devices
- Marvell Armada 370 Development Board (DB-88F6710-BP-DDR3) OpenWrt firmware
- Marvell Armada 3720 Development Board (DB-88F3720-DDR3) OpenWrt firmware
- Marvell Armada 385 Development Board AP (DB-88F6820-AP) OpenWrt firmware
- Marvell Armada 388 RD (RD-88F6820-AP) OpenWrt firmware
- Marvell Armada 7040 Development Board OpenWrt firmware
- Marvell Armada 8040 Development Board OpenWrt firmware
- Marvell Armada Armada XP GP (DB-MV784MP-GP) OpenWrt firmware
- Marvell Armada XP Development Board (DB-78460-BP) OpenWrt firmware
More devices on mvebu/cortexa9
- Buffalo LinkStation LS220DE OpenWrt firmware
- Buffalo LinkStation LS421DE OpenWrt firmware
- Ctera C200 V2 OpenWrt firmware
- CZ.NIC Turris Omnia OpenWrt firmware
- Fortinet FortiGate 30E OpenWrt firmware
- Fortinet FortiGate 50E OpenWrt firmware
- Fortinet FortiGate 51E OpenWrt firmware
- Fortinet FortiGate 52E OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.