Traverse Technologies Geos OpenWrt Firmware
The Traverse Technologies Geos is supported by OpenWrt on the x86/geode target. 7 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | x86/geode | geos |
Downloads
Download images
OpenWrt 25.12.5 · x86/geode
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-x86-geode-geos-squashfs-combined-efi.img.gz Make sure your device supports EFI boot. | combined-efi | 9d0e7c6df1de… |
| openwrt-25.12.5-x86-geode-geos-ext4-combined-efi.img.gz Make sure your device supports EFI boot. | combined-efi | 97cf46ce6547… |
| openwrt-25.12.5-x86-geode-geos-squashfs-combined.img.gz Full disk image. Not sure which one? Pick this. | combined | 8b21451314ce… |
| openwrt-25.12.5-x86-geode-geos-ext4-combined.img.gz Full disk image. Not sure which one? Pick this. | combined | 4fb1de3f8108… |
| openwrt-25.12.5-x86-geode-geos-targz-rootfs.tar.gz Rootfs archive for Docker / LXC containers. | rootfs | 2b5007496cbe… |
| openwrt-25.12.5-x86-geode-geos-ext4-rootfs.img.gz Rootfs archive for Docker / LXC containers. | rootfs | 07135eaa620e… |
| openwrt-25.12.5-x86-geode-geos-squashfs-rootfs.img.gz Rootfs archive for Docker / LXC containers. | rootfs | 78f098f34d5c… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Traverse Technologies Geos ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (16)
kmod-crypto-cbc kmod-crypto-ecb kmod-crypto-hw-geode kmod-ledtrig-gpio br2684ctl flashrom kmod-hwmon-lm90 kmod-mppe kmod-pppoa kmod-usb-ohci-pci linux-atm ppp-mod-pppoa pppdump pppstats soloscli tc
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools grub2-bios-setup kmod-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
Installation notes
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-x86-geode-geos-squashfs-combined-efi.img.gz 9d0e7c6df1de1bfd8607c80b9ab34c8a7e40a90b843112923bd083d5f9c9d4ff openwrt-25.12.5-x86-geode-geos-squashfs-combined-efi.img.gz
Build custom firmware
Need more than the default image for the Traverse Technologies Geos? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on x86/geode
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.