8devices Mango-DVK OpenWrt Firmware
- CPU
- Qualcomm IPQ6010
- RAM
- 512 MB
- Flash
- 32, 256NAND, eMMC, microSDXC MB
The 8devices Mango-DVK is supported by OpenWrt on the qualcommax/ipq60xx target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm IPQ6010 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 1800 MHz |
| RAM | 512 MB |
| Flash | 32, 256NAND, eMMC, microSDXC MB |
| 1 Gbit Ethernet ports | 2 |
| 2.5 Gbit Ethernet ports | 1 |
| WLAN hardware | Qualcomm QCN5121, Qualcomm QCN5152 |
| Switch | Qualcomm Atheros IPQ6010 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | qualcommax/ipq60xx | 8devices_mango-dvk |
Downloads
Download images
OpenWrt 25.12.5 · qualcommax/ipq60xx
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-qualcommax-ipq60xx-8devices_mango-dvk-initramfs-uImage.itb Minimal kernel image, useful for first install or recovery. | kernel | bef4e2f5638f… |
| openwrt-25.12.5-qualcommax-ipq60xx-8devices_mango-dvk-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | cf0618a91a86… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the 8devices Mango-DVK ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (1)
ipq-wifi-8devices_mango
Target default packages (37)
apk-mbedtls ath11k-firmware-ipq6018 base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-ath11k-ahb kmod-fs-ext4 kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-qca-nss-dp kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd losetup mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-qualcommax-ipq60xx-8devices_mango-dvk-initramfs-uImage.itb bef4e2f5638faa5271b2eed0c260a43218a5ebe5bfd06b94956dbf9799d30dd8 openwrt-25.12.5-qualcommax-ipq60xx-8devices_mango-dvk-initramfs-uImage.itb
Build custom firmware
Need more than the default image for the 8devices Mango-DVK? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More 8devices devices
- 8devices Carambola2 OpenWrt firmware
- 8devices Carambola3 OpenWrt firmware
- 8devices Habanero DVK OpenWrt firmware
- 8devices Jalapeno OpenWrt firmware
- 8devices Lima OpenWrt firmware
- 8devices Rambutan OpenWrt firmware
More devices on qualcommax/ipq60xx
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.