8devices Habanero DVK OpenWrt Firmware

CPU
Qualcomm Atheros IPQ4019
RAM
512 MB
Flash
32, eMMC, microSD MB

The 8devices Habanero DVK is supported by OpenWrt/ImmortalWrt on the ipq40xx/generic target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUQualcomm Atheros IPQ4019
CPU cores4
CPU frequency717 MHz
RAM512 MB
Flash32, eMMC, microSD MB
1 Gbit Ethernet ports5
WLAN hardwareQualcomm Atheros IPQ4019
SwitchQualcomm Atheros QCA8075

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ipq40xx/generic8dev_habanero-dvk
ImmortalWrt25.12.1ipq40xx/generic8dev_habanero-dvk

Downloads

Download images

OpenWrt 25.12.5 · ipq40xx/generic

ImageTypesha256
openwrt-25.12.5-ipq40xx-generic-8dev_habanero-dvk-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade985ab30ffc99
openwrt-25.12.5-ipq40xx-generic-8dev_habanero-dvk-initramfs-uImage.itb

Minimal kernel image, useful for first install or recovery.

kernela15afa6c6ae0

ImmortalWrt 25.12.1 · ipq40xx/generic

ImageTypesha256
immortalwrt-25.12.1-ipq40xx-generic-8dev_habanero-dvk-initramfs-uImage.itb

Minimal kernel image, useful for first install or recovery.

kernel826b3d7773a8
immortalwrt-25.12.1-ipq40xx-generic-8dev_habanero-dvk-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradec670b6854db3

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the 8devices Habanero DVK ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ipq40xx/generic

Target default packages (34)

apk-mbedtls ath10k-board-qca4019 ath10k-firmware-qca4019-ct base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ipq40xx/generic

Target default packages (41)

apk-openssl ath10k-board-qca4019 ath10k-firmware-qca4019-ct autocore automount base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-openssl logd luci luci-app-cpufreq mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ipq40xx-generic-8dev_habanero-dvk-squashfs-sysupgrade.bin
    985ab30ffc9967fdf2341821ea7e6d90d8888d7af1df63a0341b7569edb29e15  openwrt-25.12.5-ipq40xx-generic-8dev_habanero-dvk-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the 8devices Habanero DVK? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device