ASUS Lyra Mini (MAP-AC1300) OpenWrt Firmware

CPU
Qualcomm Atheros IPQ4018
RAM
256 MB
Flash
128NAND MB

The ASUS Lyra Mini (MAP-AC1300) is supported by OpenWrt/ImmortalWrt on the ipq40xx/generic target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUQualcomm Atheros IPQ4018
CPU cores4
CPU frequency717 MHz
RAM256 MB
Flash128NAND MB
1 Gbit Ethernet ports2
WLAN hardwareQualcomm Atheros IPQ4018
SwitchQualcomm Atheros QCA8072

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ipq40xx/genericasus_map-ac1300
ImmortalWrt25.12.1ipq40xx/genericasus_map-ac1300

Downloads

Download images

OpenWrt 25.12.5 · ipq40xx/generic

ImageTypesha256
openwrt-25.12.5-ipq40xx-generic-asus_map-ac1300-initramfs-uImage.itb

Minimal kernel image, useful for first install or recovery.

kerneldb17d81ee925
openwrt-25.12.5-ipq40xx-generic-asus_map-ac1300-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade91feda52d713

ImmortalWrt 25.12.1 · ipq40xx/generic

ImageTypesha256
immortalwrt-25.12.1-ipq40xx-generic-asus_map-ac1300-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade6c3e8afde07f
immortalwrt-25.12.1-ipq40xx-generic-asus_map-ac1300-initramfs-uImage.itb

Minimal kernel image, useful for first install or recovery.

kernel8d13b02804c4

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the ASUS Lyra Mini (MAP-AC1300) ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ipq40xx/generic

Device packages (1)

kmod-ath3k

Target default packages (34)

apk-mbedtls ath10k-board-qca4019 ath10k-firmware-qca4019-ct base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ipq40xx/generic

Device packages (1)

kmod-ath3k

Target default packages (41)

apk-openssl ath10k-board-qca4019 ath10k-firmware-qca4019-ct autocore automount base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-openssl logd luci luci-app-cpufreq mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ipq40xx-generic-asus_map-ac1300-initramfs-uImage.itb
    db17d81ee925e96e7e7d0af643e9fbdcdd03f2fdf534a3fb10ede7fae39ef63e  openwrt-25.12.5-ipq40xx-generic-asus_map-ac1300-initramfs-uImage.itb

Build custom firmware

Need more than the default image for the ASUS Lyra Mini (MAP-AC1300)? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device