AVM FRITZ!Box 7530 OpenWrt Firmware
- CPU
- Qualcomm Atheros IPQ4019
- RAM
- 256 MB
- Flash
- 128NAND MB
The AVM FRITZ!Box 7530 is supported by OpenWrt/ImmortalWrt on the ipq40xx/generic target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros IPQ4019 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 716 MHz |
| RAM | 256 MB |
| Flash | 128NAND MB |
| 1 Gbit Ethernet ports | 4 |
| WLAN hardware | Qualcomm Atheros IPQ4019 |
| Switch | Qualcomm Atheros QCA8075 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ipq40xx/generic | avm_fritzbox-7530 |
| ImmortalWrt | 25.12.1 | ipq40xx/generic | avm_fritzbox-7530 |
Downloads
Download images
OpenWrt 25.12.5 · ipq40xx/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ipq40xx-generic-avm_fritzbox-7530-initramfs-uImage.itb Minimal kernel image, useful for first install or recovery. | kernel | 80ac28b7abf6… |
| openwrt-25.12.5-ipq40xx-generic-avm_fritzbox-7530-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 07d79686ab57… |
ImmortalWrt 25.12.1 · ipq40xx/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ipq40xx-generic-avm_fritzbox-7530-initramfs-uImage.itb Minimal kernel image, useful for first install or recovery. | kernel | b23e83c91953… |
| immortalwrt-25.12.1-ipq40xx-generic-avm_fritzbox-7530-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 833496b61474… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the AVM FRITZ!Box 7530 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ipq40xx/generic
Device packages (3)
fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
Target default packages (34)
apk-mbedtls ath10k-board-qca4019 ath10k-firmware-qca4019-ct base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ipq40xx/generic
Device packages (3)
fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
Target default packages (41)
apk-openssl ath10k-board-qca4019 ath10k-firmware-qca4019-ct autocore automount base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-openssl logd luci luci-app-cpufreq mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ipq40xx-generic-avm_fritzbox-7530-initramfs-uImage.itb 80ac28b7abf6955e30948b5b5e357c643c67e9cdd008610a1574733e1f5596e0 openwrt-25.12.5-ipq40xx-generic-avm_fritzbox-7530-initramfs-uImage.itb
Build custom firmware
Need more than the default image for the AVM FRITZ!Box 7530? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More AVM devices
- AVM FRITZ!Box 3370 Rev. 2 (Hynix NAND) OpenWrt firmware
- AVM FRITZ!Box 3370 Rev. 2 (Micron NAND) OpenWrt firmware
- AVM FRITZ!Box 3390 OpenWrt firmware
- AVM FRITZ!Box 3490 Micron NAND OpenWrt firmware
- AVM FRITZ!Box 3490 Other NAND OpenWrt firmware
- AVM FRITZ!Box 4020 OpenWrt firmware
- AVM FRITZ!Box 4040 OpenWrt firmware
- AVM FRITZ!Box 5490 Micron NAND OpenWrt firmware
More devices on ipq40xx/generic
Upstream
Upstream & source
- downloads.openwrt.org — ipq40xx/generic 25.12.5
- downloads.immortalwrt.org — ipq40xx/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.