Airpi AP3000M OpenWrt Firmware

Name: Airpi AP3000M
Brand: Airpi

The Airpi AP3000M is supported by OpenWrt on the mediatek/filogic target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	mediatek/filogic	airpi_ap3000m

Downloads

Download images

OpenWrt 25.12.5 · mediatek/filogic

Image	Type	sha256
openwrt-25.12.5-mediatek-filogic-airpi_ap3000m-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery.	kernel	d2e14f130751…
openwrt-25.12.5-mediatek-filogic-airpi_ap3000m-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	ce9d1bf545b3…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Airpi AP3000M ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (7)

kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3 f2fsck mkf2fs

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-mediatek-filogic-airpi_ap3000m-initramfs-kernel.bin
d2e14f13075155579037e3dff386661ebaa3d665d4ce702c22fcc9013aa539bc  openwrt-25.12.5-mediatek-filogic-airpi_ap3000m-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the Airpi AP3000M? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More devices on mediatek/filogic

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.