Aruba AP-115 OpenWrt Firmware

CPU
Qualcomm Atheros QCA9558
RAM
256 MB
Flash
32 MB

The Aruba AP-115 is supported by OpenWrt/ImmortalWrt on the ath79/generic target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUQualcomm Atheros QCA9558
CPU cores1
CPU frequency720 MHz
RAM256 MB
Flash32 MB
1 Gbit Ethernet ports1
WLAN hardwareQualcomm Atheros QCA9558, Qualcomm Atheros QCA9880

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ath79/genericaruba_ap-115
ImmortalWrt25.12.1ath79/genericaruba_ap-115

Downloads

Download images

OpenWrt 25.12.5 · ath79/generic

ImageTypesha256
openwrt-25.12.5-ath79-generic-aruba_ap-115-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade8dc831f649b5
openwrt-25.12.5-ath79-generic-aruba_ap-115-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kerneld64cb8fd61e0

ImmortalWrt 25.12.1 · ath79/generic

ImageTypesha256
immortalwrt-25.12.1-ath79-generic-aruba_ap-115-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelcb1d1bf72ba5
immortalwrt-25.12.1-ath79-generic-aruba_ap-115-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradea42e0d5a30b6

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Aruba AP-115 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ath79/generic

Device packages (1)

kmod-usb2

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ath79/generic

Device packages (1)

kmod-usb2

Target default packages (33)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ath79-generic-aruba_ap-115-squashfs-sysupgrade.bin
    8dc831f649b54c18453c3b06da4c57425a62f0a16af7497b1e1c27dc10faffd3  openwrt-25.12.5-ath79-generic-aruba_ap-115-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the Aruba AP-115? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device