AVM FRITZ!Box 7360 SL OpenWrt Firmware
- CPU
- Lantiq XWAY VRX288
- RAM
- 128 MB
- Flash
- 16, 32 MB
The AVM FRITZ!Box 7360 SL is supported by OpenWrt/ImmortalWrt on the lantiq/xrx200 target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Lantiq XWAY VRX288 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 500 MHz |
| RAM | 128 MB |
| Flash | 16, 32 MB |
| 100 Mbit Ethernet ports | 2 |
| 1 Gbit Ethernet ports | 2 |
| WLAN hardware | Atheros AR928 -BL1A |
| Switch | Lantiq GSWIP (built-in SoC switch) |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | lantiq/xrx200 | avm_fritz7360sl |
| ImmortalWrt | 25.12.1 | lantiq/xrx200 | avm_fritz7360sl |
Downloads
Download images
OpenWrt 25.12.5 · lantiq/xrx200
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-lantiq-xrx200-avm_fritz7360sl-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | c4cacccad7de… |
| openwrt-25.12.5-lantiq-xrx200-avm_fritz7360sl-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 3c890dd98c11… |
ImmortalWrt 25.12.1 · lantiq/xrx200
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-lantiq-xrx200-avm_fritz7360sl-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 0e36d0eca477… |
| immortalwrt-25.12.1-lantiq-xrx200-avm_fritz7360sl-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 999f7bd4e050… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the AVM FRITZ!Box 7360 SL ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · lantiq/xrx200
Device packages (7)
kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 fritz-tffs xrx200-rev1.1-phy11g-firmware xrx200-rev1.2-phy11g-firmware
Target default packages (37)
apk-mbedtls base-files ca-bundle dnsmasq dropbear dsl-vrx200-firmware-xdsl-a dsl-vrx200-firmware-xdsl-b-patch firewall4 fstools kmod-dsa-gswip kmod-gpio-button-hotplug kmod-leds-gpio kmod-ltq-atm-vr9 kmod-ltq-deu-vr9 kmod-ltq-ptm-vr9 kmod-ltq-vdsl-vr9 kmod-ltq-vdsl-vr9-mei kmod-nft-offload libc libgcc libustream-mbedtls logd ltq-vdsl-vr9-app ltq-vdsl-vr9-vectoring-fw-installer mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoa ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
ImmortalWrt 25.12.1 · lantiq/xrx200
Device packages (7)
kmod-ath9k kmod-owl-loader wpad-openssl kmod-usb-dwc2 fritz-tffs xrx200-rev1.1-phy11g-firmware xrx200-rev1.2-phy11g-firmware
Target default packages (41)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear dsl-vrx200-firmware-xdsl-a dsl-vrx200-firmware-xdsl-b-patch firewall4 fstools kmod-dsa-gswip kmod-gpio-button-hotplug kmod-leds-gpio kmod-ltq-atm-vr9 kmod-ltq-deu-vr9 kmod-ltq-ptm-vr9 kmod-ltq-vdsl-vr9 kmod-ltq-vdsl-vr9-mei kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd ltq-vdsl-vr9-app ltq-vdsl-vr9-vectoring-fw-installer luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoa ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-lantiq-xrx200-avm_fritz7360sl-squashfs-sysupgrade.bin c4cacccad7deff416cd36d55b58a46c318ec447ec3a4f2bec70d7e5c283fbf9e openwrt-25.12.5-lantiq-xrx200-avm_fritz7360sl-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the AVM FRITZ!Box 7360 SL? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More AVM devices
- AVM FRITZ!Box 3370 Rev. 2 (Hynix NAND) OpenWrt firmware
- AVM FRITZ!Box 3370 Rev. 2 (Micron NAND) OpenWrt firmware
- AVM FRITZ!Box 3390 OpenWrt firmware
- AVM FRITZ!Box 3490 Micron NAND OpenWrt firmware
- AVM FRITZ!Box 3490 Other NAND OpenWrt firmware
- AVM FRITZ!Box 4020 OpenWrt firmware
- AVM FRITZ!Box 4040 OpenWrt firmware
- AVM FRITZ!Box 5490 Micron NAND OpenWrt firmware
More devices on lantiq/xrx200
- Arcadyan VGV7510KW22 BRN OpenWrt firmware
- Arcadyan VGV7510KW22 NOR OpenWrt firmware
- Arcadyan VGV7519 BRN OpenWrt firmware
- Arcadyan VGV7519 NOR OpenWrt firmware
- Arcadyan VRV9510KWAC23 OpenWrt firmware
- British Telecom (BT) Home Hub 5 Type A OpenWrt firmware
- Buffalo WBMR-300HPD OpenWrt firmware
- Lantiq VR9 EASY80920 NAND OpenWrt firmware
Upstream
Upstream & source
- downloads.openwrt.org — lantiq/xrx200 25.12.5
- downloads.immortalwrt.org — lantiq/xrx200 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.