Arcadyan VGV7510KW22 BRN OpenWrt Firmware

The Arcadyan VGV7510KW22 BRN is supported by OpenWrt/ImmortalWrt on the lantiq/xrx200 target. 2 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5lantiq/xrx200arcadyan_vgv7510kw22-brn
ImmortalWrt25.12.1lantiq/xrx200arcadyan_vgv7510kw22-brn

Downloads

Download images

OpenWrt 25.12.5 · lantiq/xrx200

ImageTypesha256
openwrt-25.12.5-lantiq-xrx200-arcadyan_vgv7510kw22-brn-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelcfde2f39399e…

ImmortalWrt 25.12.1 · lantiq/xrx200

ImageTypesha256
immortalwrt-25.12.1-lantiq-xrx200-arcadyan_vgv7510kw22-brn-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel97a656e4f0a9…

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Arcadyan VGV7510KW22 BRN ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · lantiq/xrx200

Device packages (7)

kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc xrx200-rev1.1-phy22f-firmware xrx200-rev1.2-phy22f-firmware

Target default packages (37)

apk-mbedtls base-files ca-bundle dnsmasq dropbear dsl-vrx200-firmware-xdsl-a dsl-vrx200-firmware-xdsl-b-patch firewall4 fstools kmod-dsa-gswip kmod-gpio-button-hotplug kmod-leds-gpio kmod-ltq-atm-vr9 kmod-ltq-deu-vr9 kmod-ltq-ptm-vr9 kmod-ltq-vdsl-vr9 kmod-ltq-vdsl-vr9-mei kmod-nft-offload libc libgcc libustream-mbedtls logd ltq-vdsl-vr9-app ltq-vdsl-vr9-vectoring-fw-installer mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoa ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · lantiq/xrx200

Device packages (7)

kmod-rt2800-pci wpad-basic-openssl kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc xrx200-rev1.1-phy22f-firmware xrx200-rev1.2-phy22f-firmware

Target default packages (41)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear dsl-vrx200-firmware-xdsl-a dsl-vrx200-firmware-xdsl-b-patch firewall4 fstools kmod-dsa-gswip kmod-gpio-button-hotplug kmod-leds-gpio kmod-ltq-atm-vr9 kmod-ltq-deu-vr9 kmod-ltq-ptm-vr9 kmod-ltq-vdsl-vr9 kmod-ltq-vdsl-vr9-mei kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd ltq-vdsl-vr9-app ltq-vdsl-vr9-vectoring-fw-installer luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoa ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

Installation notes

  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-lantiq-xrx200-arcadyan_vgv7510kw22-brn-initramfs-kernel.bin
cfde2f39399eab8c49c405654e42008325a545d49f87c1fcdb55f4256678e704  openwrt-25.12.5-lantiq-xrx200-arcadyan_vgv7510kw22-brn-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the Arcadyan VGV7510KW22 BRN? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

Related

Related devices

More Arcadyan devices

More devices on lantiq/xrx200

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.