Arcadyan ARV7519PW OpenWrt Firmware

The Arcadyan ARV7519PW is supported by OpenWrt/ImmortalWrt on the lantiq/xway target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5lantiq/xwayarcadyan_arv7519pw
ImmortalWrt25.12.1lantiq/xwayarcadyan_arv7519pw

Downloads

Download images

OpenWrt 25.12.5 · lantiq/xway

ImageTypesha256
openwrt-25.12.5-lantiq-xway-arcadyan_arv7519pw-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade0c8512788d50…
openwrt-25.12.5-lantiq-xway-arcadyan_arv7519pw-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel9d504a67e75f…

ImmortalWrt 25.12.1 · lantiq/xway

ImageTypesha256
immortalwrt-25.12.1-lantiq-xway-arcadyan_arv7519pw-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade00ed9a820442…
immortalwrt-25.12.1-lantiq-xway-arcadyan_arv7519pw-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelf0531ca3229d…

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Arcadyan ARV7519PW ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · lantiq/xway

Device packages (9)

kmod-usb-dwc2 kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube ltq-adsl-app ppp-mod-pppoa kmod-rt2800-pci wpad-basic-mbedtls

Target default packages (27)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · lantiq/xway

Device packages (9)

kmod-usb-dwc2 kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube ltq-adsl-app ppp-mod-pppoa kmod-rt2800-pci wpad-openssl

Target default packages (31)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-lantiq-xway-arcadyan_arv7519pw-squashfs-sysupgrade.bin
0c8512788d5078335403204a4345360f9408ba1e5ee14414f95e26b88163c53b  openwrt-25.12.5-lantiq-xway-arcadyan_arv7519pw-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the Arcadyan ARV7519PW? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

Related

Related devices

More Arcadyan devices

More devices on lantiq/xway

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.