Arcadyan ARV7510PW22 OpenWrt Firmware

The Arcadyan ARV7510PW22 is supported by OpenWrt/ImmortalWrt on the lantiq/xway target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5lantiq/xwayarcadyan_arv7510pw22
ImmortalWrt25.12.1lantiq/xwayarcadyan_arv7510pw22

Downloads

Download images

OpenWrt 25.12.5 · lantiq/xway

ImageTypesha256
openwrt-25.12.5-lantiq-xway-arcadyan_arv7510pw22-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradeacf6199ecb36
openwrt-25.12.5-lantiq-xway-arcadyan_arv7510pw22-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel3d6d55b24339

ImmortalWrt 25.12.1 · lantiq/xway

ImageTypesha256
immortalwrt-25.12.1-lantiq-xway-arcadyan_arv7510pw22-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelbe3be08c8c79
immortalwrt-25.12.1-lantiq-xway-arcadyan_arv7510pw22-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradea066758fc9d0

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Arcadyan ARV7510PW22 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · lantiq/xway

Device packages (15)

kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube ltq-adsl-app ppp-mod-pppoa kmod-ltq-tapi kmod-ltq-vmmc kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-uhci kmod-usb2 kmod-usb2-pci

Target default packages (27)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · lantiq/xway

Device packages (15)

kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube ltq-adsl-app ppp-mod-pppoa kmod-ltq-tapi kmod-ltq-vmmc kmod-rt2800-pci wpad-openssl kmod-usb-uhci kmod-usb2 kmod-usb2-pci

Target default packages (31)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-lantiq-xway-arcadyan_arv7510pw22-squashfs-sysupgrade.bin
    acf6199ecb3622b6090544bfc8ff82f4f4d15bd7bc617434c8c557823d3721e3  openwrt-25.12.5-lantiq-xway-arcadyan_arv7510pw22-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the Arcadyan ARV7510PW22? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device