AudioCodes MediaPack MP-252 OpenWrt Firmware
- CPU
- Lantiq XWAY Danube
- RAM
- 64 MB
- Flash
- 32 MB
The AudioCodes MediaPack MP-252 is supported by OpenWrt/ImmortalWrt on the lantiq/xway target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Lantiq XWAY Danube |
|---|---|
| CPU cores | 2 |
| CPU frequency | 333 MHz |
| RAM | 64 MB |
| Flash | 32 MB |
| 100 Mbit Ethernet ports | 4 |
| WLAN hardware | Ralink RT3062F |
| Switch | Infineon ADM6996I |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | lantiq/xway | audiocodes_mp-252 |
| ImmortalWrt | 25.12.1 | lantiq/xway | audiocodes_mp-252 |
Downloads
Download images
OpenWrt 25.12.5 · lantiq/xway
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-lantiq-xway-audiocodes_mp-252-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | a322c2c403d6… |
| openwrt-25.12.5-lantiq-xway-audiocodes_mp-252-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | f18705b50e63… |
ImmortalWrt 25.12.1 · lantiq/xway
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-lantiq-xway-audiocodes_mp-252-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 4ce84433a033… |
| immortalwrt-25.12.1-lantiq-xway-audiocodes_mp-252-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | b1f7ccf12234… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the AudioCodes MediaPack MP-252 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · lantiq/xway
Device packages (12)
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube kmod-ltq-tapi kmod-ltq-vmmc kmod-usb-ledtrig-usbport kmod-usb-dwc2 kmod-rt2800-pci ltq-adsl-app ppp-mod-pppoa wpad-basic-mbedtls
Target default packages (27)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd
ImmortalWrt 25.12.1 · lantiq/xway
Device packages (12)
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube kmod-ltq-tapi kmod-ltq-vmmc kmod-usb-ledtrig-usbport kmod-usb-dwc2 kmod-rt2800-pci ltq-adsl-app ppp-mod-pppoa wpad-openssl
Target default packages (31)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-lantiq-xway-audiocodes_mp-252-initramfs-kernel.bin a322c2c403d655347ec396d28e80134db80879e66569a78467f2a5ed432d6913 openwrt-25.12.5-lantiq-xway-audiocodes_mp-252-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the AudioCodes MediaPack MP-252? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on lantiq/xway
Upstream
Upstream & source
- downloads.openwrt.org — lantiq/xway 25.12.5
- downloads.immortalwrt.org — lantiq/xway 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.