Belkin F9K1109 Version 1.0 OpenWrt Firmware

CPU: Ralink RT3883
RAM: 64 MB
Flash: 8 MB

The Belkin F9K1109 Version 1.0 is supported by OpenWrt on the ramips/rt3883 target. 1 firmware image is available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPU	Ralink RT3883
CPU cores	1
CPU frequency	500 MHz
RAM	64 MB
Flash	8 MB
1 Gbit Ethernet ports	5
WLAN hardware	Ralink RT3883, Ralink RT3092L
Switch	Realtek RTL8367R-VB

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	ramips/rt3883	belkin_f9k1109v1

Downloads

Download images

OpenWrt 25.12.5 · ramips/rt3883

Image	Type	sha256
openwrt-25.12.5-ramips-rt3883-belkin_f9k1109v1-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	548035246f0f…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Belkin F9K1109 Version 1.0 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (3)

kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-rt2800-pci kmod-rt2800-soc libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-ramips-rt3883-belkin_f9k1109v1-squashfs-sysupgrade.bin
548035246f0f836e4a08cad7c092304437b643c2fc7ab143af0f8cdb8f7bcd60  openwrt-25.12.5-ramips-rt3883-belkin_f9k1109v1-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the Belkin F9K1109 Version 1.0? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More Belkin devices

More devices on ramips/rt3883

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.