Cisco Meraki MX64 A0 OpenWrt Firmware

The Cisco Meraki MX64 A0 is supported by OpenWrt/ImmortalWrt on the bcm53xx/generic target. 2 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5bcm53xx/genericmeraki_mx64-a0
ImmortalWrt25.12.1bcm53xx/genericmeraki_mx64-a0

Downloads

Download images

OpenWrt 25.12.5 · bcm53xx/generic

ImageTypesha256
openwrt-25.12.5-bcm53xx-generic-meraki_mx64-a0-squashfs.sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade0867ae5453a8…

ImmortalWrt 25.12.1 · bcm53xx/generic

ImageTypesha256
immortalwrt-25.12.1-bcm53xx-generic-meraki_mx64-a0-squashfs.sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradeca1f15152fb4…

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Cisco Meraki MX64 A0 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · bcm53xx/generic

Device packages (5)

-oseama kmod-leds-pwm kmod-usb-ehci kmod-usb-ohci kmod-usb2

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables nvram odhcp6c odhcpd-ipv6only osafeloader oseama otrx ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · bcm53xx/generic

Device packages (5)

-oseama kmod-leds-pwm kmod-usb-ehci kmod-usb-ohci kmod-usb2

Target default packages (34)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables nvram odhcp6c odhcpd-ipv6only osafeloader oseama otrx ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-bcm53xx-generic-meraki_mx64-a0-squashfs.sysupgrade.bin
0867ae5453a88a3e0a7acd0beebed97141ea7c78e5ca8cf483356149330963d0  openwrt-25.12.5-bcm53xx-generic-meraki_mx64-a0-squashfs.sysupgrade.bin

Build custom firmware

Need more than the default image for the Cisco Meraki MX64 A0? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

Related

Related devices

More Cisco Meraki devices

More devices on bcm53xx/generic

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.