Comtrend AR-5387un OpenWrt Firmware

CPU
Broadcom BCM6328
RAM
64 MB
Flash
16 MB

The Comtrend AR-5387un is supported by OpenWrt/ImmortalWrt on the bmips/bcm6328 target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUBroadcom BCM6328
CPU cores1
CPU frequency320 MHz
RAM64 MB
Flash16 MB
100 Mbit Ethernet ports4
WLAN hardwareBroadcom BCM43225
SwitchBroadcom BCM6328

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5bmips/bcm6328comtrend_ar-5387un
ImmortalWrt25.12.1bmips/bcm6328comtrend_ar-5387un

Downloads

Download images

OpenWrt 25.12.5 · bmips/bcm6328

ImageTypesha256
openwrt-25.12.5-bmips-bcm6328-comtrend_ar-5387un-squashfs-cfe.bincfeffe931786d42
openwrt-25.12.5-bmips-bcm6328-comtrend_ar-5387un-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade2b9e7a1e5535

ImmortalWrt 25.12.1 · bmips/bcm6328

ImageTypesha256
immortalwrt-25.12.1-bmips-bcm6328-comtrend_ar-5387un-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradef957f607a94e
immortalwrt-25.12.1-bmips-bcm6328-comtrend_ar-5387un-squashfs-cfe.bincfe7058c0f65ee3

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Comtrend AR-5387un ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · bmips/bcm6328

Device packages (7)

kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb2 kmod-b43 wpad-basic-mbedtls broadcom-43225-sprom kmod-leds-bcm6328

Target default packages (26)

apk-mbedtls base-files ca-bundle dnsmasq dropbear ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · bmips/bcm6328

Device packages (7)

kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb2 kmod-b43 wpad-basic-openssl broadcom-43225-sprom kmod-leds-bcm6328

Target default packages (30)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-bmips-bcm6328-comtrend_ar-5387un-squashfs-cfe.bin
    ffe931786d42bfe0c7c6f2b1758f9f37badfec43de26fb45049dfe198bb254e0  openwrt-25.12.5-bmips-bcm6328-comtrend_ar-5387un-squashfs-cfe.bin

Build custom firmware

Need more than the default image for the Comtrend AR-5387un? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device