Inteno XG6846 OpenWrt Firmware
- CPU
- Broadcom BCM6328
- RAM
- 64 MB
- Flash
- 16 MB
The Inteno XG6846 is supported by OpenWrt/ImmortalWrt on the bmips/bcm6328 target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Broadcom BCM6328 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 320 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| 1 Gbit Ethernet ports | 5 |
| Switch | Marvell 88E6352 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | bmips/bcm6328 | inteno_xg6846 |
| ImmortalWrt | 25.12.1 | bmips/bcm6328 | inteno_xg6846 |
Downloads
Download images
OpenWrt 25.12.5 · bmips/bcm6328
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-bmips-bcm6328-inteno_xg6846-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 38b3f23295d3… |
| openwrt-25.12.5-bmips-bcm6328-inteno_xg6846-squashfs-cfe.bin | cfe | 99c0ad0b073f… |
ImmortalWrt 25.12.1 · bmips/bcm6328
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-bmips-bcm6328-inteno_xg6846-squashfs-cfe.bin | cfe | 64ef7d0575aa… |
| immortalwrt-25.12.1-bmips-bcm6328-inteno_xg6846-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 98ed2b209151… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Inteno XG6846 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · bmips/bcm6328
Device packages (8)
kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb2 kmod-i2c-core kmod-i2c-gpio kmod-leds-bcm6328 kmod-dsa-mv88e6xxx kmod-sfp
Target default packages (26)
apk-mbedtls base-files ca-bundle dnsmasq dropbear ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
ImmortalWrt 25.12.1 · bmips/bcm6328
Device packages (8)
kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb2 kmod-i2c-core kmod-i2c-gpio kmod-leds-bcm6328 kmod-dsa-mv88e6xxx kmod-sfp
Target default packages (30)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear ethtool firewall4 fstools kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-bmips-bcm6328-inteno_xg6846-squashfs-sysupgrade.bin 38b3f23295d393af6fcb7ea64f6b0a48daa2f214b0dc75f507e84405fd220b93 openwrt-25.12.5-bmips-bcm6328-inteno_xg6846-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the Inteno XG6846? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on bmips/bcm6328
Upstream
Upstream & source
- downloads.openwrt.org — bmips/bcm6328 25.12.5
- downloads.immortalwrt.org — bmips/bcm6328 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.