D-Link DAP-1720 A1 OpenWrt Firmware
- CPU
- Qualcomm Atheros QCA9563-AL3A
- RAM
- 64 MB
- Flash
- 16 MB
The D-Link DAP-1720 A1 is supported by OpenWrt/ImmortalWrt on the ath79/tiny target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros QCA9563-AL3A |
|---|---|
| CPU cores | 1 |
| CPU frequency | 775 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| 1 Gbit Ethernet ports | 1 |
| WLAN hardware | Qualcomm Atheros QCA9563-AL3A, Qualcomm Atheros QCA9880-BR4A |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ath79/tiny | dlink_dap-1720-a1 |
| ImmortalWrt | 25.12.1 | ath79/tiny | dlink_dap-1720-a1 |
Downloads
Download images
OpenWrt 25.12.5 · ath79/tiny
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ath79-tiny-dlink_dap-1720-a1-squashfs-factory.bin For first-time flash from stock firmware. | factory | ceef66f66879… |
| openwrt-25.12.5-ath79-tiny-dlink_dap-1720-a1-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | ecc54da6d160… |
| openwrt-25.12.5-ath79-tiny-dlink_dap-1720-a1-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 274c49b0c468… |
ImmortalWrt 25.12.1 · ath79/tiny
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ath79-tiny-dlink_dap-1720-a1-squashfs-factory.bin For first-time flash from stock firmware. | factory | 0bdfd1d7d914… |
| immortalwrt-25.12.1-ath79-tiny-dlink_dap-1720-a1-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | c17024e88b40… |
| immortalwrt-25.12.1-ath79-tiny-dlink_dap-1720-a1-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | c882bab4a2a2… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the D-Link DAP-1720 A1 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ath79/tiny
Device packages (4)
-swconfig ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers rssileds
Target default packages (28)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ath79/tiny
Device packages (4)
-swconfig ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers rssileds
Target default packages (32)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-openssl
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ath79-tiny-dlink_dap-1720-a1-squashfs-factory.bin ceef66f66879efa99f6e8b7c21ad45e9e4323fb522eb033227bd4bf06b018765 openwrt-25.12.5-ath79-tiny-dlink_dap-1720-a1-squashfs-factory.bin
Build custom firmware
Need more than the default image for the D-Link DAP-1720 A1? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More D-Link devices
- D-Link AQUILA PRO AI E30 A1 OpenWrt firmware
- D-Link AQUILA PRO AI M30 A1 OpenWrt firmware
- D-Link AQUILA PRO AI M60 A1 OpenWrt firmware
- D-Link COVR-C1200 A1 OpenWrt firmware
- D-Link COVR-P2500 A1 OpenWrt firmware
- D-Link COVR-X1860 A1 OpenWrt firmware
- D-Link DAP-1325 A1 OpenWrt firmware
- D-Link DAP-1330 A1 OpenWrt firmware
More devices on ath79/tiny
Upstream
Upstream & source
- downloads.openwrt.org — ath79/tiny 25.12.5
- downloads.immortalwrt.org — ath79/tiny 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.