EnGenius EAP1750H OpenWrt Firmware
- CPU
- Qualcomm Atheros QCA9558
- RAM
- 128 MB
- Flash
- 16 MB
The EnGenius EAP1750H is supported by OpenWrt/ImmortalWrt on the ath79/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros QCA9558 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 720 MHz |
| RAM | 128 MB |
| Flash | 16 MB |
| 1 Gbit Ethernet ports | 1 |
| WLAN hardware | Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ath79/generic | engenius_eap1750h |
| ImmortalWrt | 25.12.1 | ath79/generic | engenius_eap1750h |
Downloads
Download images
OpenWrt 25.12.5 · ath79/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ath79-generic-engenius_eap1750h-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | f9e159779687… |
| openwrt-25.12.5-ath79-generic-engenius_eap1750h-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | b3b1039b3724… |
| openwrt-25.12.5-ath79-generic-engenius_eap1750h-squashfs-factory.bin For first-time flash from stock firmware. | factory | 9dc2098e514b… |
ImmortalWrt 25.12.1 · ath79/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ath79-generic-engenius_eap1750h-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 82af053f7745… |
| immortalwrt-25.12.1-ath79-generic-engenius_eap1750h-squashfs-factory.bin For first-time flash from stock firmware. | factory | 6572d850fb67… |
| immortalwrt-25.12.1-ath79-generic-engenius_eap1750h-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | b21ed433b972… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the EnGenius EAP1750H ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ath79/generic
Device packages (2)
ath10k-firmware-qca988x-ct kmod-ath10k-ct
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ath79/generic
Device packages (2)
ath10k-firmware-qca988x-ct kmod-ath10k-ct
Target default packages (33)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ath79-generic-engenius_eap1750h-initramfs-kernel.bin f9e1597796870ec29c99bf0c234aadfe7e91ebd33cf2b70799624a17c3b2301f openwrt-25.12.5-ath79-generic-engenius_eap1750h-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the EnGenius EAP1750H? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More EnGenius devices
- EnGenius EAP1200H OpenWrt firmware
- EnGenius EAP300 v2 OpenWrt firmware
- EnGenius EAP600 OpenWrt firmware
- EnGenius ECB1200 OpenWrt firmware
- EnGenius ECB1750 OpenWrt firmware
- EnGenius ECB600 OpenWrt firmware
- EnGenius ENS1750 OpenWrt firmware
- EnGenius ENS202EXT v1 OpenWrt firmware
More devices on ath79/generic
Upstream
Upstream & source
- downloads.openwrt.org — ath79/generic 25.12.5
- downloads.immortalwrt.org — ath79/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.