Firefly ROC-RK3328-CC OpenWrt Firmware
- CPU
- Rockchip RK3328
- RAM
- 2048 MB
- Flash
- eMMC, microSDHC
The Firefly ROC-RK3328-CC is supported by OpenWrt on the rockchip/armv8 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Rockchip RK3328 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 1400 MHz |
| RAM | 2048 MB |
| Flash | eMMC, microSDHC |
| 1 Gbit Ethernet ports | 1 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | rockchip/armv8 | firefly_roc-rk3328-cc |
Downloads
Download images
OpenWrt 25.12.5 · rockchip/armv8
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-rockchip-armv8-firefly_roc-rk3328-cc-squashfs-sysupgrade.img.gz Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | e8f3d3f09379… |
| openwrt-25.12.5-rockchip-armv8-firefly_roc-rk3328-cc-ext4-sysupgrade.img.gz Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 8f2830b195c7… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Firefly ROC-RK3328-CC ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Target default packages (29)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-rockchip-armv8-firefly_roc-rk3328-cc-squashfs-sysupgrade.img.gz e8f3d3f09379cd5c1600daee3e0ee26926c7837cc0c52e828a5153c13220face openwrt-25.12.5-rockchip-armv8-firefly_roc-rk3328-cc-squashfs-sysupgrade.img.gz
Build custom firmware
Need more than the default image for the Firefly ROC-RK3328-CC? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Firefly devices
More devices on rockchip/armv8
- ArmSoM Sige7 OpenWrt firmware
- FriendlyARM NanoPC T4 OpenWrt firmware
- FriendlyARM NanoPC T6 OpenWrt firmware
- FriendlyARM NanoPi R2C OpenWrt firmware
- FriendlyARM NanoPi R2C Plus OpenWrt firmware
- FriendlyARM NanoPi R2S OpenWrt firmware
- FriendlyARM NanoPi R3S OpenWrt firmware
- FriendlyARM NanoPi R4S 4GB LPDDR4 OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.