FriendlyARM NanoPC T6 OpenWrt Firmware

CPU: Rockchip RK3588
RAM: more than 4GB
Flash: eMMC, microSDXC

The FriendlyARM NanoPC T6 is supported by OpenWrt on the rockchip/armv8 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPU	Rockchip RK3588
CPU cores	8
CPU frequency	2400 MHz
RAM	more than 4GB
Flash	eMMC, microSDXC
2.5 Gbit Ethernet ports	2

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	rockchip/armv8	friendlyarm_nanopc-t6

Downloads

Download images

OpenWrt 25.12.5 · rockchip/armv8

Image	Type	sha256
openwrt-25.12.5-rockchip-armv8-friendlyarm_nanopc-t6-ext4-sysupgrade.img.gz Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	96c0622a51bb…
openwrt-25.12.5-rockchip-armv8-friendlyarm_nanopc-t6-squashfs-sysupgrade.img.gz Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	8beba28c110f…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the FriendlyARM NanoPC T6 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (1)

kmod-r8169

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-rockchip-armv8-friendlyarm_nanopc-t6-ext4-sysupgrade.img.gz
96c0622a51bbf98d01697869c981eb791da0533b3a71b04780963a48f6e337d8  openwrt-25.12.5-rockchip-armv8-friendlyarm_nanopc-t6-ext4-sysupgrade.img.gz

Build custom firmware

Need more than the default image for the FriendlyARM NanoPC T6? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More FriendlyARM devices

More devices on rockchip/armv8

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.