I-O DATA WN-DAX3000GR OpenWrt Firmware
- CPU
- Qualcomm IPQ5018
- RAM
- 512 MB
- Flash
- 128NAND MB
The I-O DATA WN-DAX3000GR is supported by OpenWrt on the qualcommax/ipq50xx target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm IPQ5018 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 1000 MHz |
| RAM | 512 MB |
| Flash | 128NAND MB |
| 1 Gbit Ethernet ports | 5 |
| WLAN hardware | Qualcomm IPQ5018, Qualcomm QCN6102 |
| Switch | Qualcomm Atheros QCA8337 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | qualcommax/ipq50xx | iodata_wn-dax3000gr |
Downloads
Download images
OpenWrt 25.12.5 · qualcommax/ipq50xx
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-qualcommax-ipq50xx-iodata_wn-dax3000gr-squashfs-factory.bin For first-time flash from stock firmware. | factory | df8eba7074e1… |
| openwrt-25.12.5-qualcommax-ipq50xx-iodata_wn-dax3000gr-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | ce1418491dd9… |
| openwrt-25.12.5-qualcommax-ipq50xx-iodata_wn-dax3000gr-initramfs-uImage.itb Minimal kernel image, useful for first install or recovery. | kernel | 138930def7af… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the I-O DATA WN-DAX3000GR ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (2)
ath11k-firmware-ipq5018-qcn6122 ipq-wifi-iodata_wn-dax3000gr
Target default packages (36)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-ath11k-ahb kmod-fs-ext4 kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-qca-nss-dp kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd losetup mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-qualcommax-ipq50xx-iodata_wn-dax3000gr-squashfs-factory.bin df8eba7074e11a3df1ae173b78b968ee9eff7040cee7c175064ad3060069544f openwrt-25.12.5-qualcommax-ipq50xx-iodata_wn-dax3000gr-squashfs-factory.bin
Build custom firmware
Need more than the default image for the I-O DATA WN-DAX3000GR? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More I-O DATA devices
- I-O DATA BSH-G24MB OpenWrt firmware
- I-O DATA ETG3-R OpenWrt firmware
- I-O DATA WN-AC1167DGR OpenWrt firmware
- I-O DATA WN-AC1167GR OpenWrt firmware
- I-O DATA WN-AC1600DGR OpenWrt firmware
- I-O DATA WN-AC1600DGR2/DGR3 OpenWrt firmware
- I-O DATA WN-AC733GR3 OpenWrt firmware
- I-O DATA WN-AG300DGR OpenWrt firmware
More devices on qualcommax/ipq50xx
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.