ipTIME NAS1dual OpenWrt Firmware
- CPU
- Marvell Armada 385 88F6820
- RAM
- 2048 MB
- Flash
- 64 MB
The ipTIME NAS1dual is supported by OpenWrt on the mvebu/cortexa9 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Marvell Armada 385 88F6820 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 1600 MHz |
| RAM | 2048 MB |
| Flash | 64 MB |
| 1 Gbit Ethernet ports | 2 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mvebu/cortexa9 | iptime_nas1dual |
Downloads
Download images
OpenWrt 25.12.5 · mvebu/cortexa9
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mvebu-cortexa9-iptime_nas1dual-targz-rootfs.tar.gz Rootfs archive for Docker / LXC containers. | rootfs | 4737d25294f2… |
| openwrt-25.12.5-mvebu-cortexa9-iptime_nas1dual-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | e8dc71f56c1b… |
| openwrt-25.12.5-mvebu-cortexa9-iptime_nas1dual-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 93649daeecfa… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the ipTIME NAS1dual ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (3)
kmod-hwmon-drivetemp kmod-hwmon-gpiofan kmod-usb-xhci-pci-renesas
Target default packages (26)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mvebu-cortexa9-iptime_nas1dual-targz-rootfs.tar.gz 4737d25294f2d3ce236c91d769b53d92bbd6f5d73e4a4fab96fc47a7102c692b openwrt-25.12.5-mvebu-cortexa9-iptime_nas1dual-targz-rootfs.tar.gz
Build custom firmware
Need more than the default image for the ipTIME NAS1dual? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More ipTIME devices
- ipTIME A1004ns OpenWrt firmware
- ipTIME A104ns OpenWrt firmware
- ipTIME A3 OpenWrt firmware
- ipTIME A3002MESH OpenWrt firmware
- ipTIME A3004NS-dual OpenWrt firmware
- ipTIME A3004T OpenWrt firmware
- ipTIME A6004MX OpenWrt firmware
- ipTIME A6004NS-M OpenWrt firmware
More devices on mvebu/cortexa9
- Buffalo LinkStation LS220DE OpenWrt firmware
- Buffalo LinkStation LS421DE OpenWrt firmware
- Ctera C200 V2 OpenWrt firmware
- CZ.NIC Turris Omnia OpenWrt firmware
- Fortinet FortiGate 30E OpenWrt firmware
- Fortinet FortiGate 50E OpenWrt firmware
- Fortinet FortiGate 51E OpenWrt firmware
- Fortinet FortiGate 52E OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.