Libre Computer ALL-H3-CC H5 OpenWrt Firmware
- CPU
- Allwinner H5
- RAM
- 2048 MB
- Flash
- eMMC, microSDXC
The Libre Computer ALL-H3-CC H5 is supported by OpenWrt on the sunxi/cortexa53 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Allwinner H5 |
|---|---|
| CPU cores | 4 |
| CPU frequency | 1000 MHz |
| RAM | 2048 MB |
| Flash | eMMC, microSDXC |
| 100 Mbit Ethernet ports | 1 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | sunxi/cortexa53 | libretech_all-h3-cc-h5 |
Downloads
Download images
OpenWrt 25.12.5 · sunxi/cortexa53
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-sunxi-cortexa53-libretech_all-h3-cc-h5-squashfs-sdcard.img.gz Disk image to write onto an SD card. | sdcard | 35a60e941c13… |
| openwrt-25.12.5-sunxi-cortexa53-libretech_all-h3-cc-h5-ext4-sdcard.img.gz Disk image to write onto an SD card. | sdcard | 4fd7ba26146b… |
| openwrt-25.12.5-sunxi-cortexa53-libretech_all-h3-cc-h5-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 7c60891ec894… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Libre Computer ALL-H3-CC H5 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Target default packages (28)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd
Installation notes
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-sunxi-cortexa53-libretech_all-h3-cc-h5-squashfs-sdcard.img.gz 35a60e941c137d6545cbd0854b3f460c697ea28e930869118a3f119e08c97175 openwrt-25.12.5-sunxi-cortexa53-libretech_all-h3-cc-h5-squashfs-sdcard.img.gz
Build custom firmware
Need more than the default image for the Libre Computer ALL-H3-CC H5? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on sunxi/cortexa53
- FriendlyARM NanoPi NEO Plus2 OpenWrt firmware
- FriendlyARM NanoPi NEO2 OpenWrt firmware
- FriendlyARM Nanopi R1S H5 OpenWrt firmware
- Olimex A64-Olinuxino OpenWrt firmware
- Olimex A64-Olinuxino eMMC OpenWrt firmware
- Pine64 Pine64+ OpenWrt firmware
- Pine64 SoPine OpenWrt firmware
- Xunlong Orange Pi One Plus OpenWrt firmware
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.