MediaTek MT7620a + MT7530 EVB OpenWrt Firmware

Name: MediaTek MT7620a + MT7530 EVB
Brand: MediaTek

The MediaTek MT7620a + MT7530 EVB is supported by OpenWrt on the ramips/mt7620 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	ramips/mt7620	ralink_mt7620a-mt7530-evb

Downloads

Download images

OpenWrt 25.12.5 · ramips/mt7620

Image	Type	sha256
openwrt-25.12.5-ramips-mt7620-ralink_mt7620a-mt7530-evb-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	cfbca1d4632a…
openwrt-25.12.5-ramips-mt7620-ralink_mt7620a-mt7530-evb-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery.	kernel	a6ffec817c86…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the MediaTek MT7620a + MT7530 EVB ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-rt2800-soc libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-ramips-mt7620-ralink_mt7620a-mt7530-evb-squashfs-sysupgrade.bin
cfbca1d4632a9bb26b1f65648e34cccff7de2798a9709e2138d178aac3c3bcfb  openwrt-25.12.5-ramips-mt7620-ralink_mt7620a-mt7530-evb-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the MediaTek MT7620a + MT7530 EVB? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More MediaTek devices

More devices on ramips/mt7620

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.