NEC Aterm WG2600HP OpenWrt Firmware
- CPU
- Qualcomm Atheros IPQ8064
- RAM
- 512 MB
- Flash
- 32 MB
The NEC Aterm WG2600HP is supported by OpenWrt/ImmortalWrt on the ipq806x/generic target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Qualcomm Atheros IPQ8064 |
|---|---|
| CPU cores | 2 |
| CPU frequency | 1400 MHz |
| RAM | 512 MB |
| Flash | 32 MB |
| 1 Gbit Ethernet ports | 5 |
| WLAN hardware | 2x Qualcomm Atheros QCA9980 |
| Switch | Qualcomm Atheros QCA8337 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ipq806x/generic | nec_wg2600hp |
| ImmortalWrt | 25.12.1 | ipq806x/generic | nec_wg2600hp |
Downloads
Download images
OpenWrt 25.12.5 · ipq806x/generic
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ipq806x-generic-nec_wg2600hp-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 55bc075c34d2… |
| openwrt-25.12.5-ipq806x-generic-nec_wg2600hp-initramfs-uImage Minimal kernel image, useful for first install or recovery. | kernel | 957c05ad4274… |
ImmortalWrt 25.12.1 · ipq806x/generic
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-ipq806x-generic-nec_wg2600hp-initramfs-uImage Minimal kernel image, useful for first install or recovery. | kernel | 3ce6188f7df4… |
| immortalwrt-25.12.1-ipq806x-generic-nec_wg2600hp-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | cc60e95f3ed6… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the NEC Aterm WG2600HP ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · ipq806x/generic
Device packages (1)
ath10k-firmware-qca99x0-ct
Target default packages (37)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ata-ahci kmod-ata-ahci-platform kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-phy-qcom-ipq806x-usb kmod-usb-dwc3-qcom kmod-usb-ledtrig-usbport kmod-usb-ohci kmod-usb2 kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
ImmortalWrt 25.12.1 · ipq806x/generic
Device packages (1)
ath10k-firmware-qca99x0-ct
Target default packages (44)
apk-openssl autocore automount base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ata-ahci kmod-ata-ahci-platform kmod-ath10k-ct kmod-gpio-button-hotplug kmod-leds-gpio kmod-nf-nathelper kmod-nft-offload kmod-phy-qcom-ipq806x-usb kmod-usb-dwc3-qcom kmod-usb-ledtrig-usbport kmod-usb-ohci kmod-usb2 kmod-usb3 libc libgcc libustream-openssl logd luci luci-app-cpufreq mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ipq806x-generic-nec_wg2600hp-squashfs-sysupgrade.bin 55bc075c34d2a97f2928dada3e03eadcae90208639779ebc1af7c50fe7609816 openwrt-25.12.5-ipq806x-generic-nec_wg2600hp-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the NEC Aterm WG2600HP? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More NEC devices
- NEC Aterm WF1200CR OpenWrt firmware
- NEC Aterm WF1200HP OpenWrt firmware
- NEC Aterm WF1200HP2 OpenWrt firmware
- NEC Aterm WG1200CR OpenWrt firmware
- NEC Aterm WG1400HP OpenWrt firmware
- NEC Aterm WG1800HP OpenWrt firmware
- NEC Aterm WG1800HP2 OpenWrt firmware
- NEC Aterm WG2200HP OpenWrt firmware
More devices on ipq806x/generic
Upstream
Upstream & source
- downloads.openwrt.org — ipq806x/generic 25.12.5
- downloads.immortalwrt.org — ipq806x/generic 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.