NXP FRDM-LS1012A OpenWrt Firmware

CPU
NXP LS1012A
RAM
512 MB
Flash
64 MB

The NXP FRDM-LS1012A is supported by OpenWrt/ImmortalWrt on the layerscape/armv8_64b target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUNXP LS1012A
CPU cores1
CPU frequency800 MHz
RAM512 MB
Flash64 MB
1 Gbit Ethernet ports2

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5layerscape/armv8_64bfsl_ls1012a-frdm
ImmortalWrt25.12.1layerscape/armv8_64bfsl_ls1012a-frdm

Downloads

Download images

OpenWrt 25.12.5 · layerscape/armv8_64b

ImageTypesha256
openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-frdm-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradefc4286a36ff9…
openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-frdm-squashfs-firmware.binfirmwarea00a2b3e386a…

ImmortalWrt 25.12.1 · layerscape/armv8_64b

ImageTypesha256
immortalwrt-25.12.1-layerscape-armv8_64b-fsl_ls1012a-frdm-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgradecc0bee5c7322…
immortalwrt-25.12.1-layerscape-armv8_64b-fsl_ls1012a-frdm-squashfs-firmware.binfirmwareffa0c1d2e03e…

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the NXP FRDM-LS1012A ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · layerscape/armv8_64b

Device packages (2)

layerscape-ppfe kmod-ppfe

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-nft-offload kmod-usb-dwc3 kmod-usb-storage kmod-usb3 libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

ImmortalWrt 25.12.1 · layerscape/armv8_64b

Device packages (2)

layerscape-ppfe kmod-ppfe

Target default packages (34)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear e2fsprogs firewall4 fstools kmod-nf-nathelper kmod-nft-offload kmod-usb-dwc3 kmod-usb-storage kmod-usb3 libc libgcc libustream-openssl logd luci mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-frdm-squashfs-sysupgrade.bin
fc4286a36ff9b31e662578f92b2ee554ca8307102864ad2a1a505d6adbcca11a  openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-frdm-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the NXP FRDM-LS1012A? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

Related

Related devices

More NXP devices

More devices on layerscape/armv8_64b

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.