NXP LS1012A-RDB OpenWrt Firmware
- CPU
- NXP LS1012A
- RAM
- 1024 MB
- Flash
- 64, eMMC MB
The NXP LS1012A-RDB is supported by OpenWrt/ImmortalWrt on the layerscape/armv8_64b target. 4 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | NXP LS1012A |
|---|---|
| CPU cores | 1 |
| CPU frequency | 800 MHz |
| RAM | 1024 MB |
| Flash | 64, eMMC MB |
| 1 Gbit Ethernet ports | 2 |
| WLAN hardware | SDIO WiFi module |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | layerscape/armv8_64b | fsl_ls1012a-rdb |
| ImmortalWrt | 25.12.1 | layerscape/armv8_64b | fsl_ls1012a-rdb |
Downloads
Download images
OpenWrt 25.12.5 · layerscape/armv8_64b
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-rdb-squashfs-firmware.bin | firmware | 5df492d0d175… |
| openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-rdb-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | f2eed6f4c8bb… |
ImmortalWrt 25.12.1 · layerscape/armv8_64b
| Image | Type | sha256 |
|---|---|---|
| immortalwrt-25.12.1-layerscape-armv8_64b-fsl_ls1012a-rdb-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 9f69dc41a880… |
| immortalwrt-25.12.1-layerscape-armv8_64b-fsl_ls1012a-rdb-squashfs-firmware.bin | firmware | 1e75ac8dca83… |
Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the NXP LS1012A-RDB ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
OpenWrt 25.12.5 · layerscape/armv8_64b
Device packages (5)
layerscape-ppfe kmod-hwmon-ina2xx kmod-iio-fxas21002c-i2c kmod-iio-fxos8700-i2c kmod-ppfe
Target default packages (30)
apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-nft-offload kmod-usb-dwc3 kmod-usb-storage kmod-usb3 libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
ImmortalWrt 25.12.1 · layerscape/armv8_64b
Device packages (5)
layerscape-ppfe kmod-hwmon-ina2xx kmod-iio-fxas21002c-i2c kmod-iio-fxos8700-i2c kmod-ppfe
Target default packages (34)
apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear e2fsprogs firewall4 fstools kmod-nf-nathelper kmod-nft-offload kmod-usb-dwc3 kmod-usb-storage kmod-usb3 libc libgcc libustream-openssl logd luci mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only partx-utils ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-rdb-squashfs-firmware.bin 5df492d0d17511c9601c737ae9f12b499b78901a6874c4ca92566aa599b10406 openwrt-25.12.5-layerscape-armv8_64b-fsl_ls1012a-rdb-squashfs-firmware.bin
Build custom firmware
Need more than the default image for the NXP LS1012A-RDB? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More NXP devices
- NXP FRDM-LS1012A OpenWrt firmware
- NXP FRWY-LS1012A OpenWrt firmware
- NXP FRWY-LS1046A Default OpenWrt firmware
- NXP FRWY-LS1046A SD Card Boot OpenWrt firmware
- NXP i.MX8M OpenWrt firmware
- NXP LS1021A-IoT SD Card Boot OpenWrt firmware
- NXP LS1028A-RDB Default OpenWrt firmware
- NXP LS1028A-RDB SD Card Boot OpenWrt firmware
More devices on layerscape/armv8_64b
Upstream
Upstream & source
- downloads.openwrt.org — layerscape/armv8_64b 25.12.5
- downloads.immortalwrt.org — layerscape/armv8_64b 25.12.1
- OpenWrt Table of Hardware
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.