Qihoo 360T7 (UBI) OpenWrt Firmware

Name: Qihoo 360T7 (UBI)
Brand: Qihoo

The Qihoo 360T7 (UBI) is supported by OpenWrt on the mediatek/filogic target. 4 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	mediatek/filogic	qihoo_360t7-ubi

Downloads

Download images

OpenWrt 25.12.5 · mediatek/filogic

Image	Type	sha256
openwrt-25.12.5-mediatek-filogic-qihoo_360t7-ubi-preloader.bin	preloader.bin	6c4f7e575fe0…
openwrt-25.12.5-mediatek-filogic-qihoo_360t7-ubi-initramfs-recovery.itb Minimal kernel image, useful for first install or recovery.	kernel	d9b924f40b68…
openwrt-25.12.5-mediatek-filogic-qihoo_360t7-ubi-squashfs-sysupgrade.itb Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	c5da2f917cf2…
openwrt-25.12.5-mediatek-filogic-qihoo_360t7-ubi-bl31-uboot.fip	bl31-uboot.fip	b90f6eebb06c…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Qihoo 360T7 (UBI) ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (3)

kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-mediatek-filogic-qihoo_360t7-ubi-preloader.bin
6c4f7e575fe00c59a9d16210328d2ada650784f1c2ac979bad5daba5dc0e261b  openwrt-25.12.5-mediatek-filogic-qihoo_360t7-ubi-preloader.bin

Build custom firmware

Need more than the default image for the Qihoo 360T7 (UBI)? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More Qihoo devices

More devices on mediatek/filogic

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.