Sophos RED 15w Rev.1 OpenWrt Firmware
- CPU
- Freescale P1010
- RAM
- 128 MB
- Flash
- 128NAND MB
The Sophos RED 15w Rev.1 is supported by OpenWrt on the mpc85xx/p1010 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Freescale P1010 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 533 MHz |
| RAM | 128 MB |
| Flash | 128NAND MB |
| 1 Gbit Ethernet ports | 5 |
| WLAN hardware | SparkLan WPEA-121N, Atheros AR9382 |
| Switch | Realtek RTL8367RB |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mpc85xx/p1010 | sophos_red-15w-rev1 |
Downloads
Download images
OpenWrt 25.12.5 · mpc85xx/p1010
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mpc85xx-p1010-sophos_red-15w-rev1-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 3e70a0aceb48… |
| openwrt-25.12.5-mpc85xx-p1010-sophos_red-15w-rev1-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | d29388c9d467… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Sophos RED 15w Rev.1 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Target default packages (34)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-button-hotplug kmod-crypto-hw-talitos kmod-input-core kmod-input-gpio-keys kmod-leds-gpio kmod-nft-offload kmod-usb2 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mpc85xx-p1010-sophos_red-15w-rev1-squashfs-sysupgrade.bin 3e70a0aceb48615a4c941799dc3e63d5b192533ac53140a696b627b5bf2e8be3 openwrt-25.12.5-mpc85xx-p1010-sophos_red-15w-rev1-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the Sophos RED 15w Rev.1? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Sophos devices
- Sophos AP100 OpenWrt firmware
- Sophos AP100C OpenWrt firmware
- Sophos AP15 OpenWrt firmware
- Sophos AP15C OpenWrt firmware
- Sophos AP55 OpenWrt firmware
- Sophos AP55C OpenWrt firmware
More devices on mpc85xx/p1010
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.