Watchguard Firebox T10 OpenWrt Firmware
The Watchguard Firebox T10 is supported by OpenWrt on the mpc85xx/p1010 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | mpc85xx/p1010 | watchguard_firebox-t10 |
Downloads
Download images
OpenWrt 25.12.5 · mpc85xx/p1010
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-mpc85xx-p1010-watchguard_firebox-t10-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | af86529464f9… |
| openwrt-25.12.5-mpc85xx-p1010-watchguard_firebox-t10-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | e58ca128b8d1… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Watchguard Firebox T10 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (2)
kmod-rtc-s35390a kmod-eeprom-at24
Target default packages (34)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-button-hotplug kmod-crypto-hw-talitos kmod-input-core kmod-input-gpio-keys kmod-leds-gpio kmod-nft-offload kmod-usb2 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-mpc85xx-p1010-watchguard_firebox-t10-initramfs-kernel.bin af86529464f98728d4fd47cc70badc3e6424f2f1aacf1b7a27807d7a8c30d160 openwrt-25.12.5-mpc85xx-p1010-watchguard_firebox-t10-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the Watchguard Firebox T10? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Watchguard devices
More devices on mpc85xx/p1010
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.