Ubiquiti airCube AC OpenWrt Firmware

CPU
Atheros AR9342
RAM
64 MB
Flash
16 MB

The Ubiquiti airCube AC is supported by OpenWrt/ImmortalWrt on the ath79/generic target. 6 firmware images are available from the official OpenWrt 25.12.5 and ImmortalWrt 25.12.1 stable releases — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUAtheros AR9342
CPU cores1
CPU frequency533 MHz
RAM64 MB
Flash16 MB
1 Gbit Ethernet ports4
WLAN hardwareAtheros AR9342, Qualcomm Atheros QCA9882
SwitchAtheros AR8327N

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ath79/genericubnt_aircube-ac
ImmortalWrt25.12.1ath79/genericubnt_aircube-ac

Downloads

Download images

OpenWrt 25.12.5 · ath79/generic

ImageTypesha256
openwrt-25.12.5-ath79-generic-ubnt_aircube-ac-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade0431707f2714
openwrt-25.12.5-ath79-generic-ubnt_aircube-ac-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernelb2a26fee539a
openwrt-25.12.5-ath79-generic-ubnt_aircube-ac-squashfs-factory.bin

For first-time flash from stock firmware.

factoryb84e10e374ae

ImmortalWrt 25.12.1 · ath79/generic

ImageTypesha256
immortalwrt-25.12.1-ath79-generic-ubnt_aircube-ac-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade7cb471a8d9ce
immortalwrt-25.12.1-ath79-generic-ubnt_aircube-ac-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kernel7b1a2db722d8
immortalwrt-25.12.1-ath79-generic-ubnt_aircube-ac-squashfs-factory.bin

For first-time flash from stock firmware.

factoryb99340dd3638

Downloads are served by the official OpenWrt/ImmortalWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Ubiquiti airCube AC ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

OpenWrt 25.12.5 · ath79/generic

Device packages (3)

kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

ImmortalWrt 25.12.1 · ath79/generic

Device packages (3)

kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct

Target default packages (33)

apk-openssl base-files block-mount ca-bundle default-settings-chn dnsmasq-full dropbear firewall4 fstools kmod-ath9k kmod-gpio-button-hotplug kmod-nf-nathelper kmod-nft-offload libc libgcc libustream-openssl logd luci mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uboot-envtools uci uclient-fetch urandom-seed urngd wpad-openssl

Installation notes

  • First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ath79-generic-ubnt_aircube-ac-squashfs-sysupgrade.bin
    0431707f271483c5d042ccd96005daadb869164bbb7ea2419a0c9ae52cbe7479  openwrt-25.12.5-ath79-generic-ubnt_aircube-ac-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the Ubiquiti airCube AC? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device