Xiaomi Mi Router AX3000T OpenWrt Firmware

Name: Xiaomi Mi Router AX3000T
Brand: Xiaomi

The Xiaomi Mi Router AX3000T is supported by OpenWrt on the mediatek/filogic target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	mediatek/filogic	xiaomi_mi-router-ax3000t

Downloads

Download images

OpenWrt 25.12.5 · mediatek/filogic

Image	Type	sha256
openwrt-25.12.5-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery.	kernel	d3934e33fb3a…
openwrt-25.12.5-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi For first-time flash from stock firmware.	initramfs-factory.ubi	b5e075d74c6d…
openwrt-25.12.5-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	a94ac2c7177b…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Xiaomi Mi Router AX3000T ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (3)

kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware

Target default packages (30)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-kernel.bin
d3934e33fb3a5a31a889aefc65156aa2d0b309abb0402c510ecfe0fb8b41999b  openwrt-25.12.5-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the Xiaomi Mi Router AX3000T? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More Xiaomi devices

More devices on mediatek/filogic

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.