Allnet ALL5002 OpenWrt Firmware
- CPU
- Ralink RT3352
- RAM
- 64 MB
- Flash
- 32 MB
The Allnet ALL5002 is supported by OpenWrt on the ramips/rt305x target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Ralink RT3352 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 400 MHz |
| RAM | 64 MB |
| Flash | 32 MB |
| 100 Mbit Ethernet ports | 1 |
| WLAN hardware | Ralink RT3352 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ramips/rt305x | allnet_all5002 |
Downloads
Download images
OpenWrt 25.12.5 · ramips/rt305x
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ramips-rt305x-allnet_all5002-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 676538b51369… |
| openwrt-25.12.5-ramips-rt305x-allnet_all5002-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | ea55f519ef9c… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Allnet ALL5002 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (6)
kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-i2c-gpio kmod-hwmon-lm92 kmod-gpio-pcf857x
Target default packages (28)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-rt2800-soc libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ramips-rt305x-allnet_all5002-initramfs-kernel.bin 676538b51369c2239ad06216dd0e0ab4bfc99b760a51bcf7f5d5a2b0edf9aec1 openwrt-25.12.5-ramips-rt305x-allnet_all5002-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the Allnet ALL5002? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on ramips/rt305x
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.