Fon Fonera 2.0N OpenWrt Firmware
- CPU
- Ralink RT3052 v2
- RAM
- 64 MB
- Flash
- 8 MB
The Fon Fonera 2.0N is supported by OpenWrt on the ramips/rt305x target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Ralink RT3052 v2 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 384 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| 100 Mbit Ethernet ports | 5 |
| WLAN hardware | Ralink RT3052 |
| Switch | Ralink RT3052 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ramips/rt305x | fon_fonera-20n |
Downloads
Download images
OpenWrt 25.12.5 · ramips/rt305x
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ramips-rt305x-fon_fonera-20n-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 812696111255… |
| openwrt-25.12.5-ramips-rt305x-fon_fonera-20n-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 418d29e19186… |
| openwrt-25.12.5-ramips-rt305x-fon_fonera-20n-squashfs-factory.bin For first-time flash from stock firmware. | factory | c452b6973411… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Fon Fonera 2.0N ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (2)
kmod-usb-dwc2 kmod-usb-ledtrig-usbport
Target default packages (28)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-rt2800-soc libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ramips-rt305x-fon_fonera-20n-squashfs-sysupgrade.bin 812696111255084857a84b3ae3c8fa0ce53f1268af82405e2c097b5b45c372ac openwrt-25.12.5-ramips-rt305x-fon_fonera-20n-squashfs-sysupgrade.bin
Build custom firmware
Need more than the default image for the Fon Fonera 2.0N? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More Fon devices
More devices on ramips/rt305x
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.