Fon FON2601 OpenWrt Firmware

The Fon FON2601 is supported by OpenWrt on the ramips/mt7620 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ramips/mt7620fon_fon2601

Downloads

Download images

OpenWrt 25.12.5 · ramips/mt7620

ImageTypesha256
openwrt-25.12.5-ramips-mt7620-fon_fon2601-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kerneleab8127ac9bf
openwrt-25.12.5-ramips-mt7620-fon_fon2601-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade479b91e17c3c

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Fon FON2601 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (3)

kmod-mt76x2 kmod-usb2 kmod-usb-ohci

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-rt2800-soc libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ramips-mt7620-fon_fon2601-initramfs-kernel.bin
    eab8127ac9bf116dae991edef8a4b048bcf9e38dc5fc816eea70f8f552998036  openwrt-25.12.5-ramips-mt7620-fon_fon2601-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the Fon FON2601? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

Related

Related devices

More Fon devices

More devices on ramips/mt7620

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.