Hauppauge Broadway OpenWrt Firmware
- CPU
- Ralink RT3052
- RAM
- 64 MB
- Flash
- 8 MB
The Hauppauge Broadway is supported by OpenWrt on the ramips/rt305x target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.
Specs
Specifications
| CPU | Ralink RT3052 |
|---|---|
| CPU cores | 1 |
| CPU frequency | 384 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| 100 Mbit Ethernet ports | 1 |
| WLAN hardware | Ralink RT3052 |
| Switch | Ralink RT3052 |
Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.
Build matrix
Supported firmware versions
| Distribution | Version | Target | Profile |
|---|---|---|---|
| OpenWrt | 25.12.5 | ramips/rt305x | hauppauge_broadway |
Downloads
Download images
OpenWrt 25.12.5 · ramips/rt305x
| Image | Type | sha256 |
|---|---|---|
| openwrt-25.12.5-ramips-rt305x-hauppauge_broadway-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery. | kernel | 57f8c733caef… |
| openwrt-25.12.5-ramips-rt305x-hauppauge_broadway-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt. | sysupgrade | 698f3aa778c0… |
Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.
Packages & install
Default packages & installation
Default packages
Every image for the Hauppauge Broadway ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.
Device packages (2)
kmod-usb-dwc2 kmod-usb-ledtrig-usbport
Target default packages (28)
apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-rt2800-soc libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe swconfig uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls
Installation notes
- Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
- The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
- Verify your download against the published checksum before flashing:
$ sha256sum openwrt-25.12.5-ramips-rt305x-hauppauge_broadway-initramfs-kernel.bin 57f8c733caefd1fe015efacfc17f9cd0ecb0c9edc9052cb3ffe3ae47666140a9 openwrt-25.12.5-ramips-rt305x-hauppauge_broadway-initramfs-kernel.bin
Build custom firmware
Need more than the default image for the Hauppauge Broadway? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.
Customize firmware for this deviceRelated
Related devices
More devices on ramips/rt305x
Upstream
Upstream & source
Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.