Arcadyan WE410443 OpenWrt Firmware

Name: Arcadyan WE410443
Brand: Arcadyan

The Arcadyan WE410443 is supported by OpenWrt on the ramips/mt7621 target. 2 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Build matrix

Supported firmware versions

Distribution	Version	Target	Profile
OpenWrt	25.12.5	ramips/mt7621	arcadyan_we410443

Downloads

Download images

OpenWrt 25.12.5 · ramips/mt7621

Image	Type	sha256
openwrt-25.12.5-ramips-mt7621-arcadyan_we410443-initramfs-kernel.bin Minimal kernel image, useful for first install or recovery.	kernel	ba134e579fa9…
openwrt-25.12.5-ramips-mt7621-arcadyan_we410443-squashfs-sysupgrade.bin Not sure? Pick this if upgrading from OpenWrt.	sysupgrade	0f996448be60…

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the Arcadyan WE410443 ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (2)

kmod-mt7615-firmware -uboot-envtools

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-crypto-hw-eip93 kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.

Verify your download against the published checksum before flashing:

$ sha256sum openwrt-25.12.5-ramips-mt7621-arcadyan_we410443-initramfs-kernel.bin
ba134e579fa97eb22afc5386a827171061e294f6d28e59afe066b81d28778a4a  openwrt-25.12.5-ramips-mt7621-arcadyan_we410443-initramfs-kernel.bin

Build custom firmware

Need more than the default image for the Arcadyan WE410443? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device

More Arcadyan devices

More devices on ramips/mt7621

Upstream

Upstream & source

Images are assembled from packages compiled and published by the upstream OpenWrt and ImmortalWrt projects. The complete corresponding source code is available from those projects under the GPL.