ASUS RT-AX53U OpenWrt Firmware

CPU
MediaTek MT7621AT
RAM
256 MB
Flash
128NAND MB

The ASUS RT-AX53U is supported by OpenWrt on the ramips/mt7621 target. 3 firmware images are available from the official OpenWrt 25.12.5 stable release — download one below, or build a custom OpenWrt image for this device with your own package selection.

Specs

Specifications

CPUMediaTek MT7621AT
CPU cores2
CPU frequency880 MHz
RAM256 MB
Flash128NAND MB
1 Gbit Ethernet ports4
WLAN hardwareMediaTek MT7905, MediaTek MT7975
SwitchMediaTek MT7621AT

Hardware data from the OpenWrt Table of Hardware; verify against your unit before flashing.

Build matrix

Supported firmware versions

DistributionVersionTargetProfile
OpenWrt25.12.5ramips/mt7621asus_rt-ax53u

Downloads

Download images

OpenWrt 25.12.5 · ramips/mt7621

ImageTypesha256
openwrt-25.12.5-ramips-mt7621-asus_rt-ax53u-squashfs-sysupgrade.bin

Not sure? Pick this if upgrading from OpenWrt.

sysupgrade2407f2154c04
openwrt-25.12.5-ramips-mt7621-asus_rt-ax53u-initramfs-kernel.bin

Minimal kernel image, useful for first install or recovery.

kerneld7e2c86e037a
openwrt-25.12.5-ramips-mt7621-asus_rt-ax53u-squashfs-factory.bin

For first-time flash from stock firmware.

factoryeea36fbb5837

Downloads are served by the official OpenWrt mirrors — unchanged upstream stable builds.

Packages & install

Default packages & installation

Default packages

Every image for the ASUS RT-AX53U ships these packages by default. The customize option below lets you add or remove packages before the image is assembled.

Device packages (3)

kmod-mt7915-firmware kmod-usb3 kmod-usb-ledtrig-usbport

Target default packages (29)

apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fstools kmod-crypto-hw-eip93 kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls

Installation notes

  • First install from stock firmware: flash the factoryimage through the vendor firmware's upgrade page or recovery mode.
  • Already running OpenWrt or ImmortalWrt: flash the sysupgrade image from LuCI (System → Backup / Flash Firmware) or with the sysupgrade command.
  • The kernel / initramfs image boots from RAM without writing to flash — useful for a first install or for recovering from a failed flash.
  • Verify your download against the published checksum before flashing:
    $ sha256sum openwrt-25.12.5-ramips-mt7621-asus_rt-ax53u-squashfs-sysupgrade.bin
    2407f2154c04bdb70fe98c92a50067410c44484875515f7346446b5338c1b1f4  openwrt-25.12.5-ramips-mt7621-asus_rt-ax53u-squashfs-sysupgrade.bin

Build custom firmware

Need more than the default image for the ASUS RT-AX53U? Pick your packages — LuCI apps, themes, VPN clients — set the basics, and get a ready-to-flash OpenWrt image assembled from official packages in minutes.

Customize firmware for this device